暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 ECC RDIMM 2Rx4 CL46 1.1V 288-pin memory upgrade

SKU CH-VF9V-BP1XC

96 GB DDR5-5600 registered ECC RDIMM for Supermicro X14SDV-32C-SP3F servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 5600 speed delivers PC5-44800 bandwidth for demanding server tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated systems
  • CL46 latency at 1.1 V matches the memory controller timing for reliable operation
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-32C-SP3F motherboard exactly

96GB DDR5-5600 ECC RDIMM for Supermicro servers

This 96GB registered ECC DDR5 module runs at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro X14SDV-32C-SP3F motherboard where full-capacity recognition and rated speed matter. The 2Rx4 rank configuration matches the board's memory controller expectations exactly.

Registered ECC architecture for full-slot

The registered design buffers address and command signals so every DIMM slot can be populated at full capacity without overloading the memory controller. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 288-pin RDIMM form factor is required by this platform and will not fit UDIMM or SODIMM slots.

Replaces lower-capacity or non-ECC DDR5 modules

Upgrading from smaller DDR5 RDIMMs or non-ECC memory adds 96GB of protected capacity in a single slot. The jump is worth it when workloads need maximum registered ECC density and the motherboard manual confirms this population rule. Buyers who need unbuffered memory or a different pin count cannot use this module.

特長

  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 5600 speed delivers PC5-44800 bandwidth for demanding server tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated systems
  • CL46 latency at 1.1 V matches the memory controller timing for reliable operation
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-32C-SP3F motherboard exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What CAS latency does this 5600 MT/s DDR5 RDIMM run at under sustained load?

The module operates at CL46, so the memory controller waits 46 cycles at 5600 MT/s for each column access during continuous operation.

How much power and heat does a 96 GB kit of these 1.1 V registered DIMMs produce when the server runs all day?

At 1.1 V the DIMMs draw minimal power for DDR5, and with no heat spreader they rely on chassis airflow to stay cool during 24/7 workloads.

Which motherboard must I already have for this 288-pin 2Rx4 ECC RDIMM to be recognised at full 96 GB capacity?

The kit is validated for the Supermicro X14SDV-32C-SP3F motherboard, which expects 288-pin registered DDR5 at 5600 MT/s with 2Rx4 organisation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。