Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
120 mm square cooling fan with sleeve bearing, 12 V 0.55 A four-wire power connector, non-LED black frame
The OEM Industries 1225-12HS HAPW is a 120 mm square frame cooler with a 12 V, 0.55 A four-wire PWM fan. It uses a sleeve bearing and has no LED lighting. The unit suits builders who need a standard-height tower cooler for mainstream sockets.
The four-wire connector allows motherboard speed control, but the sleeve bearing is rated for continuous operation rather than high-RPM bursts. Acoustic output will rise with voltage, and the bearing may wear faster under sustained maximum speed. Buyers who need silent operation at low duty cycles should verify the fan curve in BIOS.
This cooler replaces basic Intel or AMD stock coolers that use push-pin or clip mounts. The jump is worthwhile when the original cooler throttles under sustained loads or produces excessive noise. It does not address builds requiring high static pressure for dense radiators or dual-fan tower designs.
| Model | 1225-12HS HAPW |
|---|---|
| Color | Black |
| Type | 1225-12HS |
| Fan Size | 120mm |
| Bearing Type | Sleeve Bearing |
| Power Connector | 4 Wires |
| LED | Non-LED |
This model is a 12V fan drawing 0.55A with a four-wire connector; choose it if your motherboard header supplies 12V and supports PWM control.
It indicates the fan will pull up to 0.55 amps from the 12V header, so the motherboard fan header must be rated for at least that much current.
The fourth wire carries a PWM signal, allowing the motherboard to vary fan speed precisely instead of only adjusting voltage.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?