Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
A 92 mm ball-bearing fan delivering 12 V cooling with a 3-pin connector
The OEM Industries AUB0912L is a 92 mm square cooling fan with a 25 mm frame depth. It uses a ball-bearing motor rated at 12 V and 0.15 A, connects through a standard 3-pin header, and has no LED lighting. The unit ships new in black finish.
This fan suits builders replacing a 92 mm case or heatsink fan that uses a 3-pin connector and runs on 12 V. It does not suit systems that require PWM speed control via a 4-pin header, nor builds needing addressable RGB illumination. Buyers who need higher static pressure or larger frame sizes should look at other models.
The 3-pin power connector is the single detail that determines compatibility. Without a fourth PWM wire the motherboard can only adjust speed by varying voltage, so confirm your header and control method before purchase.
| Model | AUB0912L |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 90mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
The fan will draw 0.15 amps from a 12 volt header, so it adds very little load to the motherboard fan circuit.
A 3-pin header lets the board vary voltage to change speed, but it cannot send PWM signals for finer low-speed control.
The frame measures 92mm square and 25mm thick, matching standard 92mm fan mounting patterns.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?