Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
A 92 mm ball-bearing fan delivering 12 V cooling with a 3-pin connector
The OEM Industries AUB0912L is a 92 mm square cooling fan with a 25 mm frame depth. It uses a ball-bearing motor rated at 12 V and 0.15 A, connects through a standard 3-pin header, and has no LED lighting. The unit ships new in black finish.
This fan suits builders replacing a 92 mm case or heatsink fan that uses a 3-pin connector and runs on 12 V. It does not suit systems that require PWM speed control via a 4-pin header, nor builds needing addressable RGB illumination. Buyers who need higher static pressure or larger frame sizes should look at other models.
The 3-pin power connector is the single detail that determines compatibility. Without a fourth PWM wire the motherboard can only adjust speed by varying voltage, so confirm your header and control method before purchase.
| Model | AUB0912L |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 90mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
The fan will draw 0.15 amps from a 12 volt header, so it adds very little load to the motherboard fan circuit.
A 3-pin header lets the board vary voltage to change speed, but it cannot send PWM signals for finer low-speed control.
The frame measures 92mm square and 25mm thick, matching standard 92mm fan mounting patterns.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?