暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black square 50mm fan with three-pin connector

OEM Industries

OEM Industries BS501012H 50mm 12V 0.16A 3 Pin Fan

SKU CH-ZDPQ-BT984

50mm 12V ball-bearing fan with 3-pin connector for case or CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 50 mm square footprint fits tight chassis spaces
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing design extends operational life
  • Three-pin connector enables speed monitoring
  • No LED lighting suits stealth builds

Compact 50 mm case fan

The OEM Industries BS501012H is a 50 mm square fan designed for tight spaces inside a PC chassis. It runs on 12 V and draws 0.16 A through a standard three-pin power connector. The ball bearing and black frame suit general case airflow or small CPU cooler replacements.

Replaces noisy or failed 50 mm fans

Swap this unit in when an existing 5010-size fan becomes loud, develops bearing rattle or stops spinning. The 12 V 0.16 A rating matches the original spec, so the jump is worth it when the old fan no longer moves enough air through a compact heatsink or chassis vent.

Simple three-pin installation

The three-wire connector plugs directly onto a motherboard or fan-controller header keyed for 501012 pinout. Alignment is the only common issue — forcing the plug offset by one pin bends the header and leaves the fan unpowered.

特長

  • 50 mm square footprint fits tight chassis spaces
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing design extends operational life
  • Three-pin connector enables speed monitoring
  • No LED lighting suits stealth builds

仕様

ModelBS501012H
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

Will the 50mm square frame with 10mm thickness fit my case fan slot?

The fan measures 50mm by 50mm and is 10mm thick, so it fits any standard 50mm mounting hole pattern.

How do I connect the 3‑pin connector so the motherboard reads speed correctly?

Align the three pins with the motherboard header — ground, 12V, and tach — and press straight in; forcing it sideways bends pins and loses RPM reporting.

When should I replace the ball‑bearing fan?

Replace it once the bearing noise becomes audible or the rotor stops spinning at 12V 0.16A, as ball bearings cannot be relubricated.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。