暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square cooling fan with three wires

OEM Industries

OEM Industries D08T-24TM 80mm 24VDC 3 Pin CPU cooler

SKU CH-BMGE-38EXA

An 80 mm fan for CPU cooling running on 24 VDC with a three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Power Connector3 Pin
  • LEDNo
  • 80 mm frame fits compact builds
  • 24 V DC motor runs on standard industrial rails
  • 06 A draw keeps power budget low
  • Three-pin connector reports speed to the motherboard
  • NIDEC 8025 mechanism delivers proven bearing life

Compact 80 mm 24 V DC fan for tight builds

This OEM Industries D08T-24TM unit is an 80 mm square frame measuring 25 mm thick, designed to fit narrow chassis or legacy sockets where larger coolers cannot mount. It suits system integrators and hobbyists who need a direct 24 V DC airflow source without PWM control.

Three-pin 24 V DC interface limits speed reporting

The 3-pin connector supplies power and a tachometer signal but lacks a fourth PWM wire, so the motherboard or controller can only monitor RPM, not regulate it dynamically. Running at the fixed 0.06 A draw means airflow stays constant, which may be audible in quiet environments.

Nidec 8025 motor in a black plastic frame

The Nidec 8025 motor is housed in a black 80×80×25 mm frame with three lead wires ending in a standard 3-pin header. No LED lighting is present, keeping the visual profile neutral for server or industrial enclosures where indicator lights are unwanted.

特長

  • 80 mm frame fits compact builds
  • 24 V DC motor runs on standard industrial rails
  • 06 A draw keeps power budget low
  • Three-pin connector reports speed to the motherboard
  • NIDEC 8025 mechanism delivers proven bearing life

仕様

ModelD08T-24TM
ColorBlack
TypeFan only
Fan Size80mm
Power Connector3 Pin
LEDNo

この商品に関する質問

Which 80 mm fan version matches a 24 VDC 3 pin header?

The D08T-24TM is an 80×80×25 mm fan rated for 24 VDC with a 3 pin connector, so it fits headers that supply 24 volts and accept a three pin plug.

What does the 0.06 A rating mean once the fan is installed?

At 24 V the fan draws 0.06 amps, so it adds very little load to the 24 V rail while delivering 80 mm airflow.

How does the 3 pin interface limit speed control?

A 3 pin connector provides power, ground and a tachometer signal; voltage regulation is possible but PWM control is not supported.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。