暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm brushless CPU cooler fan with 3-wire connector

OEM Industries

OEM Industries FFB0812EHH 80mm 12V 1.35A 3-Wire CPU Cooler

SKU CH-58FF-R9WX1

An 80 mm 12 V 1.35 A ball-bearing fan with a 3-wire connector for CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Wires
  • LEDNo
  • Efficient brushless motor runs at 12V with 1.35A draw
  • 80mm frame fits tight builds while delivering strong airflow
  • Ball bearing design extends service life under continuous load
  • Three-wire connector enables speed monitoring and PWM control
  • Delta 8038 platform proven in industrial cooling applications

80 mm 12 V 3-wire fan

The OEM Industries FFB0812EHH is an 80 mm DC brushless cooler that runs on 12 V and draws 1.35 A through a standard three-wire connector. It uses a ball-bearing motor and has no LED lighting. The unit is supplied new and is intended as a direct replacement or upgrade for compatible CPU air-cooling assemblies.

Builders needing a compact 80 mm replacement

This cooler suits technicians servicing legacy or space-constrained systems that specify an 80 mm 12 V fan with a three-wire power lead. It is not suitable for builds that require PWM speed control, larger fan diameters, RGB illumination or higher airflow ratings than the unit provides.

Single-fan capacity and limits

The 80 mm frame and 1.35 A current draw give enough airflow for low-to-moderate thermal loads in tight chassis. It will run out of headroom on high-TDP processors or in cases with restricted ventilation where a larger or higher-static-pressure fan would be needed.

特長

  • Efficient brushless motor runs at 12V with 1.35A draw
  • 80mm frame fits tight builds while delivering strong airflow
  • Ball bearing design extends service life under continuous load
  • Three-wire connector enables speed monitoring and PWM control
  • Delta 8038 platform proven in industrial cooling applications

仕様

ModelFFB0812EHH
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Wires
LEDNo

この商品に関する質問

Does the FFB0812EHH need a 3-pin fan header on the motherboard to run?

Yes, it uses a 3-wire power connector that plugs directly into a standard 3-pin fan header for 12 V supply and speed reporting.

Will the 80 mm frame fit the mounting holes of an older Delta 8038 cooler?

The 80 mm square frame matches the 8038 footprint, so the same four mounting holes line up without an adapter bracket.

How can I confirm the ball-bearing fan is spinning at the rated 1.35 A after installation?

Check the motherboard hardware monitor or fan-control software; it should report a steady RPM and a current draw close to 1.35 A on the 12 V rail.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。