暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm axial fan with four-pin connector

OEM Industries

OEM Industries H80E12MS1B7-57A02 80mm 4 Pin CPU Fan

SKU CH-8WPK-8DK4N

An 80mm axial fan with dual ball bearings and a 4‑pin PWM connector runs at 12V drawing 0.58A for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • LEDNo
  • Dual ball bearing extends operational lifespan
  • 12 V, 0.58 A power draw fits standard headers
  • 80 mm axial design moves air through tight CPU zones
  • Four-pin PWM connector enables automatic speed control
  • Black frame blends cleanly into any build

80 mm 4-pin axial fan

This 80 mm axial fan uses a dual ball bearing and a 12 V, 0.58 A motor with a four-wire PWM connector. It is sold as a fan-only unit without LEDs, intended as a direct replacement for CPU or case cooling slots that accept an 8038-size frame.

Fits standard 80 mm CPU or case mounts

Builders who need a drop-in 80 mm cooler with PWM control will find the four-pin connector and ball-bearing design a match; systems that require a larger frame, a three-pin voltage-controlled header, or an integrated heatsink will not be compatible with this fan-only unit.

Four-wire PWM connector decides fit

The 4-pin PWM header is the single specification that determines whether this fan can be speed-controlled by the motherboard; if the board or controller only offers three-pin voltage control, the fan will run at full speed without regulation.

特長

  • Dual ball bearing extends operational lifespan
  • 12 V, 0.58 A power draw fits standard headers
  • 80 mm axial design moves air through tight CPU zones
  • Four-pin PWM connector enables automatic speed control
  • Black frame blends cleanly into any build

仕様

ModelH80E12MS1B7-57A02
ColorBlack
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector4 Pin
LEDNo

この商品に関する質問

What is the first limit reached under sustained load with the 2 ball bearing and 12V .58Amp rating?

The 2 ball bearing design handles continuous rotation at the rated 12V .58Amp current, so bearing wear becomes the limiting factor before electrical limits are reached.

How much noise and heat does the 80mm axial fan produce when running all day at 12V .58Amp?

The 8038 frame size and axial blade layout move air steadily at the rated 12V .58Amp, generating typical operational noise and minimal heat from the motor itself.

Which 4 pin header must my motherboard already have for this H80E12MS1B7-57A02 to function?

A standard 4 pin PWM header supplying 12V is required; the fan's 4 wire connector plugs directly into that header for power and speed control.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。