暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OEM Industries

OEM Industries HY60A-05A 60mm 5V 0.19A 3-pin CPU cooler

SKU CH-Z4WJ-SCH4A

60 mm notebook blower fan runs on 5 V and draws 0.19 A via a 3-pin connector

  • Color2-Tone
  • TypeFan only
  • Fan Size60mm
  • Power Connector3 Pin
  • Compact 60 mm footprint fits tight notebook chassis
  • 5 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Blower-style airflow directs heat out of slim vents
  • Two-tone finish distinguishes intake from exhaust

Compact 5 V notebook blower

This 60 mm blower-style fan runs on 5 V at 0.19 A and connects through a standard 3-pin header. It is designed as a replacement cooler for notebook chassis where a slim radial blower is the original thermal solution. The two-tone finish distinguishes the unit visually but does not affect airflow.

Direct swap for failed OEM blowers

When the original notebook blower develops bearing noise or stops spinning, this unit fits the same mounting pattern and voltage requirement. The jump is worth it when the laptop still meets the user’s performance needs and a full system replacement is not justified. No additional wiring or voltage conversion is required.

Suits repair technicians

Builders assembling custom desktop rigs should look elsewhere, as the radial form factor and 5 V supply are intended for integrated notebook thermal modules. Users needing PWM speed control or larger airflow for desktop CPUs will not find those features here.

特長

  • Compact 60 mm footprint fits tight notebook chassis
  • 5 V 0.19 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Blower-style airflow directs heat out of slim vents
  • Two-tone finish distinguishes intake from exhaust

仕様

ModelHY60A-05A
Color2-Tone
TypeFan only
Fan Size60mm
Power Connector3 Pin

この商品に関する質問

What clearance is needed for the 60 mm fan frame?

The cooler uses a 60 mm square frame, so the mounting area must provide at least that much open space around the screw holes for the blower housing to sit flush.

How do I connect the 3‑pin connector to a 5 V header, and what mistake should I avoid?

Align the keyed 3‑pin plug with the 5 V fan header on the notebook board and press straight down; forcing it backwards bends the pins and prevents the tachometer signal from working.

When should the blower be cleaned or replaced?

If airflow drops or bearing noise appears, remove dust from the impeller blades with compressed air; persistent noise or vibration after cleaning means the 5 V 0.19 A motor has worn and the unit should be replaced.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。