OEM Industries
OEM Industries KDE1208PTB3 80mm CPU cooler 12V 1.4W 2-pin
An 80 mm ball-bearing fan delivering 1600 to 1999 rpm at 15 to 20 dBA with a 2-pin 12 V connector
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing TypeBall
- Power Connector2 Pin
- LEDNo
- 80 mm frame fits compact builds
- Ball bearing runs at 1600-1999 rpm for steady airflow
- 12 V, 1.4 W draw keeps power use low
- 15-20 dBA operation stays quiet under load
- Two-pin connector enables simple motherboard control
Compact 80mm CPU Fan for Tight Builds
This OEM Industries KDE1208PTB3 cooler fits standard 80mm mounting holes and runs on a 12 V two‑pin header. The ball‑bearing design targets 1600‑1999 rpm while keeping acoustic output between 15 and 20 dBA. It suits small‑form‑factor systems or replacement jobs where a low‑profile black fan is required.
No Accessories or Software Included
The package contains only the fan unit itself with its two‑wire lead. There are no mounting brackets, screws, PWM cables or control utilities supplied. Installers must provide their own fixation hardware and connect the 2‑pin plug directly to a compatible motherboard or fan controller header.
2‑Pin Connector Limits Speed Control
Because the cooler uses a simple 2‑pin power connector, voltage‑based regulation is the only way to adjust fan speed. Systems that rely exclusively on 4‑pin PWM headers will not be able to modulate this fan automatically. Buyers needing PWM control or higher static pressure for dense heatsinks should look elsewhere.
特長
- 80 mm frame fits compact builds
- Ball bearing runs at 1600-1999 rpm for steady airflow
- 12 V, 1.4 W draw keeps power use low
- 15-20 dBA operation stays quiet under load
- Two-pin connector enables simple motherboard control
仕様
| Model | KDE1208PTB3 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| LED | No |
この商品に関する質問
How often should the ball bearing in the 80mm fan be inspected or replaced?
Ball bearings in a 12 V 1.4 W fan typically run for years without service; listen for rising noise above the rated 15–20 dBA as the first sign wear is starting.
What stops the KDE1208PTB3 from spinning faster when the CPU stays hot for hours?
The fan tops out at 1999 rpm, so sustained loads cannot push airflow beyond that fixed maximum speed.
Will the 2-pin connector draw more than 1.4 W or get louder than 20 dBA during all-day operation?
Power stays at 1.4 W and noise remains within the 15–20 dBA range because the 12 V supply and 1999 rpm ceiling are fixed.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



