暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 50mm blower fan with three wires

OEM Industries

OEM Industries NIDEC 5015 D05F-12PM 50mm Blower Fan 12V 0.09A 3-Wire

SKU CH-X1MW-KXXYJ

A 50 mm blower fan with ball bearing runs on 12 V and uses a 3-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • LEDNo
  • Compact blower design directs airflow through tight spaces
  • NIDEC motor ensures reliable long-term operation
  • 12 V 0.09 A keeps power draw low
  • 50 mm by 15 mm frame fits small-form-factor builds
  • Three-wire connection enables speed monitoring

Compact 50mm blower for tight builds

The OEM Industries NIDEC 5015 D05F-12PM is a 50mm blower fan designed for compact CPU air coolers and small-form-factor systems. It runs on 12V and draws 0.09A through a standard 3-wire connection. The black frame and ball bearing suit continuous operation in space-constrained chassis.

Focused airflow with limited headroom

The blower layout pushes air directly through a heatsink rather than across it, which helps in narrow ducts where axial fans stall. At 50mm diameter and 15mm thickness the fan fits slim coolers, but the modest current draw limits static pressure for dense fin stacks. It handles light thermal loads; heavier loads will exceed its capacity.

Drops into 50mm mounts with three-wire control

The unit needs a 50mm mounting pattern and a 3-pin header supplying 12V. No LED or PWM circuitry is present, so speed control relies on voltage regulation from the motherboard or a fan controller. The ball bearing reduces maintenance compared with sleeve types, freeing the builder from frequent replacement cycles in always-on systems.

特長

  • Compact blower design directs airflow through tight spaces
  • NIDEC motor ensures reliable long-term operation
  • 12 V 0.09 A keeps power draw low
  • 50 mm by 15 mm frame fits small-form-factor builds
  • Three-wire connection enables speed monitoring

仕様

ModelD05F-12PM
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
LEDNo

この商品に関する質問

Will the 50 mm blower fan with 3-wire connector fit a 12 V header on my existing motherboard?

Yes, the fan runs on 12 V and draws 0.09 A, so it will operate from any standard 3-pin or 4-pin 12 V fan header on your current board.

How can I confirm the D05F-12PM is spinning correctly once installed?

Connect the 3-wire lead to a fan header, power on the system, and verify RPM reporting in BIOS or monitoring software; the ball bearing should run smoothly without audible rattle.

Does the package include only the 5015 blower fan or are mounting screws and a power adapter also supplied?

The listing specifies "Fan only", so you receive the 50 mm blower unit itself; any mounting screws or adapters must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。