Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
90 mm four-wire CPU cooler running at 12 V and 5.6 W for PWM speed control
The OEM Industries PMD1209PTB1-A is a compact 90 mm square cooler built around a SUNON 9225 fan. It targets system builders who need a low-profile air cooler for small-form-factor or replacement applications. The unit draws 5.6 W at 12 V and uses a standard four-wire connector for speed control.
The 4-wire interface enables motherboard-controlled fan speed without extra adapters. A square frame matches common 90 mm mounting patterns found on many OEM boards and slim tower chassis. No LED lighting is present, keeping the appearance neutral for professional or embedded builds.
At 5.6 W the fan adds minimal load to a 12 V rail, leaving headroom for the rest of the system. Pulse-width modulation lets the motherboard lower RPM when the CPU is idle, reducing audible noise during light workloads. Under sustained load the cooler maintains airflow proportional to the thermal demand reported by the sensor.
| Model | PMD1209PTB1-A |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 90mm |
| Power Connector | 4 Wires |
| LED | No |
The 4-wire PWM connector runs from a 12 V supply and draws 5.6 W, so speed control is limited to that voltage rail.
The 90 mm square frame uses the standard 90 mm hole spacing, so it fits any board with matching 90 mm mounting holes.
Align the four mounting holes, secure the supplied screws in a cross pattern, then plug the 4-wire connector into the CPU fan header — forgetting the PWM wire leaves the fan at full speed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?