Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
90 mm four-wire CPU cooler running at 12 V and 5.6 W for PWM speed control
The OEM Industries PMD1209PTB1-A is a compact 90 mm square cooler built around a SUNON 9225 fan. It targets system builders who need a low-profile air cooler for small-form-factor or replacement applications. The unit draws 5.6 W at 12 V and uses a standard four-wire connector for speed control.
The 4-wire interface enables motherboard-controlled fan speed without extra adapters. A square frame matches common 90 mm mounting patterns found on many OEM boards and slim tower chassis. No LED lighting is present, keeping the appearance neutral for professional or embedded builds.
At 5.6 W the fan adds minimal load to a 12 V rail, leaving headroom for the rest of the system. Pulse-width modulation lets the motherboard lower RPM when the CPU is idle, reducing audible noise during light workloads. Under sustained load the cooler maintains airflow proportional to the thermal demand reported by the sensor.
| Model | PMD1209PTB1-A |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 90mm |
| Power Connector | 4 Wires |
| LED | No |
The 4-wire PWM connector runs from a 12 V supply and draws 5.6 W, so speed control is limited to that voltage rail.
The 90 mm square frame uses the standard 90 mm hole spacing, so it fits any board with matching 90 mm mounting holes.
Align the four mounting holes, secure the supplied screws in a cross pattern, then plug the 4-wire connector into the CPU fan header — forgetting the PWM wire leaves the fan at full speed.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
No language matches that.
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?