暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60mm blower fan with 3-pin connector

OEM Industries

OEM Industries TYF400LJ03 D06F-12B1S2 60mm blower fan

SKU CH-TVHC-9RP9T

A 60 mm blower fan with ball bearing, 3-pin connector, 12 V and 0.29 A draw

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 12 V 0.29 A blower fan delivers focused airflow for tight spaces
  • 60 mm ball-bearing design keeps noise low and lifespan long
  • 3-pin power connector fits standard motherboard headers without adapters
  • 60 × 25 mm frame slides into slim projector or small-form-factor cases
  • Blower layout pushes air across heatsinks instead of recirculating it

60mm blower fan for tight builds

This 60mm blower fan draws air through a narrow duct and exhausts it directly out of the chassis, making it suited for small-form-factor cases, projector housings or industrial enclosures where a conventional axial fan cannot fit. The three-pin 12V connector provides standard motherboard or controller compatibility for speed monitoring. It targets builders who need focused airflow in a 60 by 25mm footprint.

Ball-bearing motor runs at 12V 0.29A

The ball-bearing design reduces friction compared with sleeve alternatives, helping the fan maintain consistent speed under continuous load. At 12V and 0.29A the unit draws modest power while delivering directed cooling to hotspots such as voltage-regulator modules or compact GPU heatsinks. Noise level varies with voltage control; the blower geometry concentrates sound in the exhaust path rather than broad turbulence.

No LED lighting or bundled accessories

The package contains only the fan itself, so no RGB cables, mounting screws or software utilities are included. This keeps the installation simple for users who already have 3-pin headers and mounting hardware. Buyers who want PWM control, addressable lighting or a complete cooler kit with heatsink and brackets will need to source those separately.

特長

  • 12 V 0.29 A blower fan delivers focused airflow for tight spaces
  • 60 mm ball-bearing design keeps noise low and lifespan long
  • 3-pin power connector fits standard motherboard headers without adapters
  • 60 × 25 mm frame slides into slim projector or small-form-factor cases
  • Blower layout pushes air across heatsinks instead of recirculating it

仕様

ModelTYF400LJ03
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

How do I install the TYF400LJ03 blower fan and which step is often missed?

Mount the 60 mm frame using the four corner holes, connect the 3-pin plug to a 12 V header, and verify the airflow direction arrow points toward the heatsink — skipping the arrow check is the common error.

What maintenance will the TYF400LJ03 ball-bearing fan need later?

The sealed ball bearing requires no lubrication; clean dust from the blower wheel and intake vents every few months with compressed air to maintain airflow.

What limit appears first when the TYF400LJ03 runs continuously at 12 V?

At 0.29 A the motor draws its rated power, so the first constraint is the thermal limit of the ball bearing — if case airflow is restricted the bearing temperature rises.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。