暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Orico IG740PRO 2TB M.2 2280 NVMe SSD with silver heatsink

Orico

Orico IG740PRO 2TB M.2 NVMe internal SSD

SKU CH-N6KB-1885R

M.2 2280 NVMe drive with PCIe 4.0 speeds up to 7450 MB/s read and 1.5 million hours MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactorM.2 2280
  • Capacity512GB/1TB/2TB/4TB/8TB
  • InterfacePCI-Express 4.0 x4
  • FeaturesORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100M

Style with Copper Heatsink

Options 2TB-NVMe2.0 PCIe Gen4x4

  • Industrial-grade reliability with MTBF exceeding 1.5 million hours
  • Blazing PCIe 4.0 read speeds up to 7450 MB/s
  • Advanced data security via power-loss protection and AES encryption
  • Broad compatibility from industrial PCs to PS5 consoles
  • High-quality TLC NAND with SLC dynamic caching for sustained performance

Industrial-grade 2TB NVMe SSD

The Orico IG740PRO is a 2TB internal solid-state drive built to an industrial-grade standard. It targets workloads that demand consistent uptime and data integrity in edge computing, AI inference, and big-data logging, while also serving personal PCs and PS5 consoles.

PCIe 4.0 x4 with 7450 MB/s read headroom

The drive runs on a PCIe 4.0 x4 link and NVMe 2.0 protocol, delivering up to 7450 MB/s sequential read and 1000K IOPS on the 1TB reference point. TLC NAND and SLC dynamic caching sustain high throughput until the cache fills, after which sustained writes settle at the native TLC rate.

M.2 2280 with integrated heatsink

The 2280 form factor fits standard M.2 slots in laptops, desktops, and the PS5 expansion bay. An innovative heatsink is included to manage thermals during prolonged heavy transfers, while power-loss protection, LDPC ECC, and AES encryption protect data without requiring extra host-side configuration.

特長

  • Industrial-grade reliability with MTBF exceeding 1.5 million hours
  • Blazing PCIe 4.0 read speeds up to 7450 MB/s
  • Advanced data security via power-loss protection and AES encryption
  • Broad compatibility from industrial PCs to PS5 consoles
  • High-quality TLC NAND with SLC dynamic caching for sustained performance

仕様

BrandORICO
SeriesORICO-IG740PRO
ModelORICO-IG740PRO
Device TypeInternal Solid State Drive (SSD)
Form FactorM.2 2280
Capacity512GB/1TB/2TB/4TB/8TB
InterfacePCI-Express 4.0 x4
FeaturesORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100MB/s Read Speed, Advanced Data Security and Innovative Heatsink

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the PCIe 4.0 x4 interface run at full speed in my older PCIe 3.0 slot?

The drive uses PCIe 4.0 x4 and NVMe 2.0, so it will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 slot while remaining fully functional.

How can I verify the 7450 MB/s read speed is actually achieved after installation?

Run a sequential read benchmark such as CrystalDiskMark on an empty drive; the result should approach the rated 7450 MB/s figure under optimal thermal conditions.

Does the 2 TB IG740PRO include the innovative heatsink shown in photos, or must I buy one separately?

The drive ships with the innovative heatsink already attached; no additional cooling hardware is required for installation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。