暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

OWC

OWC 128GB (4x32GB) DDR5 4800 CL40 ECC RDIMM Dell PowerEdge XE9680

SKU CH-RV4G-HGW1K

128 GB kit of four 32 GB DDR5 4800 ECC registered DIMMs validated for Dell PowerEdge XE9680 servers

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 128GB (4 x 32GB)

  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design detects and corrects memory errors
  • 1 V operation lowers power draw in dense configurations
  • Validated for Dell PowerEdge XE9680 compatibility

Dell PowerEdge XE9680 memory kit

This 128GB kit contains four 32GB DDR5 ECC registered DIMMs built for the Dell PowerEdge XE9680. Each module runs at 4800 MT/s with CL40 latency at 1.1V. The 2Rx8 organisation and 288-pin form factor match the server's memory slots exactly.

128GB capacity for multi-socket workloads

Four ranked modules give the XE9680 enough DRAM for large virtualisation hosts, in-memory databases or GPU-accelerated training jobs. The registered buffer and on-die ECC keep data integrity intact under sustained load. Workloads that exceed 128GB per CPU socket will need higher-density DIMMs or additional memory channels.

Replaces factory DDR5 RDIMMs or expands empty slots

The kit upgrades from lower-capacity DDR5 registered memory already qualified for the XE9680. It cannot be mixed with unbuffered or load-reduced DIMMs, so buyers replacing mixed populations must swap all modules. The jump is worth it when ECC registered capacity is the bottleneck.

特長

  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design detects and corrects memory errors
  • 1 V operation lowers power draw in dense configurations
  • Validated for Dell PowerEdge XE9680 compatibility

仕様

BrandOWC
Part Number4R8D52R8128S
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell PowerEdge XE9680

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 4800 CL40 2Rx8 registered ECC modules run alongside any existing DDR5 RDIMMs already installed in the PowerEdge XE9680?

The kit contains four 32 GB DDR5 4800 CL40 2Rx8 1.1 V ECC registered DIMMs. They must not be mixed with unbuffered or load-reduced ECC modules; matching speed, rank and voltage across all populated slots is required for stable operation.

How can I verify the 128 GB kit is recognised and running at 4800 MT/s with ECC active after installation?

Enter the system BIOS or iDRAC interface and confirm the memory configuration shows 128 GB total, 4800 MT/s data rate, CL40 timings and ECC status enabled for each of the four slots.

What ships in the box and are any extra parts needed for the XE9680 upgrade?

The box contains the four 32 GB 288-pin DDR5 RDIMM modules only. No additional brackets, cables or cooling accessories are required for installation in the Dell PowerEdge XE9680.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。