暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC Registered RDIMM 1R3D32R4016P

SKU CH-K28G-Q9VYR

16 GB DDR3 1333 ECC registered RDIMM kit for HP ProLiant G6/G7 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • 16 GB DDR3 ECC registered kit for server reliability
  • CL9 latency at 1333 MHz for responsive workloads
  • 5 V operation matches original HP specifications
  • 240-pin 2Rx4 modules fit DL360 G7, DL370 G6, DL380 G7, DL385 G7, DL580 G7
  • Replaces HP part numbers 500205071, 500205171, 500206071, 501536001, 500662B21, 593913B21, A0R56A, AM231A, AM328A, FX622AA, FX622UT

16GB DDR3 ECC RDIMM kit for HP ProLiant G6/G7

This 16GB kit contains two 8GB DDR3 1333 registered DIMMs built to PC3-10600 CL9 timings at 1.5V. It is designed for HP ProLiant DL360 G7, DL370 G6, DL380 G7, DL385 G7 and DL580 G7 servers that require ECC registered memory. Standard desktop systems cannot use these modules.

Thermals noise and power in normal use

The modules operate at the standard 1.5V DDR3 voltage with no heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep power draw predictable in multi-DIMM configurations. No active cooling or additional fan speed is required beyond the server's stock thermal design.

Upgrade path and when the jump is worth it

This kit replaces HP part numbers such as 500205071, 500662B21, 593913B21 and A0R56A, matching the original 1333 MHz registered ECC specification. It is not compatible with unbuffered UDIMMs, so mixed populations are not supported. Builders who need capacities beyond 16GB per channel or speeds above DDR3 1333 must select different modules.

特長

  • 16 GB DDR3 ECC registered kit for server reliability
  • CL9 latency at 1333 MHz for responsive workloads
  • 5 V operation matches original HP specifications
  • 240-pin 2Rx4 modules fit DL360 G7, DL370 G6, DL380 G7, DL385 G7, DL580 G7
  • Replaces HP part numbers 500205071, 500205171, 500206071, 501536001, 500662B21, 593913B21, A0R56A, AM231A, AM328A, FX622AA, FX622UT

仕様

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL360 G7
HP ProLiant DL370 G6
HP ProLiant DL380 G7
HP ProLiant DL385 G7
HP ProLiant DL580 G7

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install these 240-pin DDR3 1333 RDIMMs in an HP ProLiant DL380 G7 and what slot-population rule do people miss?

Power down the server, open the chassis, and insert each 8 GB module into the correct DIMM slot for its CPU channel; the common mistake is populating slots for a second processor that isn't installed, which leaves the memory unrecognised.

What maintenance or replacement will this 16 GB ECC registered kit need over its service life?

No routine maintenance is required; if a module fails, replace the faulty 8 GB RDIMM with an identical DDR3 1333 CL9 2Rx4 1.5 V part to keep ECC and registered operation consistent.

What limit appears first when these CL9 1.5 V modules run under sustained load in a DL360 G7?

The DDR3 1333 bus and CL9 latency set the throughput ceiling, so memory bandwidth saturates before the 16 GB capacity or the 1.5 V thermal envelope becomes the bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。