暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 16GB (2x8GB) DDR3 1600 CL11 ECC Unbuffered UDIMM Kit

SKU CH-TM4W-VPV0S

A 16 GB dual-channel DDR3 1600 kit with ECC error correction for workstations and servers

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB dual-channel kit expands multitasking headroom
  • DDR3 1600 CL11 timing keeps latency low
  • ECC unbuffered design protects data integrity in workstations
  • 5 V JEDEC-standard voltage ensures broad compatibility
  • 240-pin UDIMM form factor fits standard desktop slots

Kit composition and purpose

This OWC kit supplies 16 GB of DDR3 memory in a matched pair of 8 GB modules. It is built for desktop workstations, servers and NAS systems that require ECC protection and run at 1.5 V. The unbuffered design suits standard consumer and entry-level server boards.

Capacity and headroom

Two 8 GB DIMMs give a total of 16 GB running at DDR3 1600 with CL11 timing. This amount handles typical multi-tasking, virtualisation and file-serving workloads. Systems needing more than 16 GB will require additional slots or higher-density modules.

DDR3 interface limits

The modules use the 240-pin DDR3 form factor and operate at the JEDEC-standard PC3-12800 speed grade. Bandwidth and latency are fixed by the DDR3 1600 specification; faster DDR3 speeds or later DDR generations are not supported by this kit.

特長

  • 16 GB dual-channel kit expands multitasking headroom
  • DDR3 1600 CL11 timing keeps latency low
  • ECC unbuffered design protects data integrity in workstations
  • 5 V JEDEC-standard voltage ensures broad compatibility
  • 240-pin UDIMM form factor fits standard desktop slots

仕様

BrandOWC
Part Number1E6D32R8016P
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 240-pin DDR3 1600 CL11 modules work in my older workstation that only supports unbuffered ECC memory?

Yes, the kit uses 240-pin DDR3 1600 CL11 unbuffered ECC DIMMs at 1.5 V, matching the JEDEC PC3-12800 standard for compatible desktops, workstations and servers.

How can I verify the dual-channel kit is running at the rated 1600 MHz CL11 after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1600 MHz with CAS latency 11; CPU-Z or dmidecode will also show each 8 GB module operating at PC3-12800 1.5 V.

Does the 16 GB kit include only the two 8 GB DIMMs, or are any cables or tools supplied?

The box contains only the two 8 GB DDR3 1600 CL11 ECC unbuffered UDIMMs; no cables, screws or installation tools are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。