暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 ECC Registered RDIMM 1.35V CL11 1Rx4 240-pin memory upgrade

SKU CH-WBRW-MWWD8

16 GB DDR3L 1600 ECC registered dual-rank kit for Supermicro SuperServer 8047R, 8048B, F617R2, F617R3 and F627G2 series

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • Qualified for Supermicro SuperServer 8047R, 8048B, F617R2, F617R3, F627G2
  • Replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16, MEMDR380LSV04ER16

Server-grade DDR3L ECC RDIMM kit

This OWC kit supplies 16 GB of DDR3L registered ECC memory as two 8 GB modules. It is built for Supermicro SuperServer platforms including the 8047R, 8048B, F617R2, F617R3 and F627G2 series. Workstations or servers that require registered DIMMs with error correction are the intended audience. Standard desktop boards that accept only unbuffered memory cannot use this kit.

Registered ECC with 1Rx4 organisation

The decisive specification is the registered ECC design combined with a single-rank 1Rx4 layout at 1.35 V. This matches the Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16. Systems that need unbuffered DIMMs or a different rank configuration will not accept these modules.

Steady 1600 MHz throughput under load

Rated at DDR3L 1600 (PC3L-12800) with CL11 latency, the modules maintain their rated speed during sustained server workloads. The registered buffer reduces electrical load on the memory controller, helping stability in multi-DIMM configurations over long periods. No heat spreader is fitted, so adequate chassis airflow is required for continuous operation.

特長

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • Qualified for Supermicro SuperServer 8047R, 8048B, F617R2, F617R3, F627G2
  • Replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16, MEMDR380LSV04ER16

仕様

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 8047R Series
Supermicro SuperServer 8048B Series
Supermicro SuperServer F617R2 Series
Supermicro SuperServer F617R3 Series
Supermicro SuperServer F627G2 Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 1600 MHz speed mean once the kit is installed in a Supermicro server?

The modules run at DDR3L 1600 (PC3L-12800) with CL11 latency, delivering the rated throughput when the server's memory controller operates at that frequency.

How does the DDR3L 240-pin registered ECC interface limit what the kit can do?

The registered ECC design requires a server or workstation chipset that supports registered DIMMs; it will not work in standard desktop boards and cannot be mixed with unbuffered memory.

What physical space and slot layout does the 240-pin RDIMM kit need?

Each 8 GB module is a 240-pin DDR3L RDIMM without a heat spreader, so it fits standard DDR3 DIMM slots in the listed Supermicro SuperServer chassis.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。