暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 ECC registered DIMM with black memory chips

OWC

OWC 16GB DDR3 1333 ECC Registered RDIMM memory upgrade

SKU CH-D2WG-VZFD5

16 GB DDR3 1333 ECC registered RDIMM for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 16 GB capacity extends memory headroom for virtualisation
  • DDR3 1333 MHz CL9 matches qualified platform specs
  • 240-pin registered DIMM fits Supermicro X8 series boards
  • 5 V operation meets JEDEC standard for compatibility

OWC 16GB DDR3 1333 ECC RDIMM

This OWC 16GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM is built for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards. It targets server and workstation administrators who need registered ECC memory to maintain data integrity in multi-socket systems. Standard desktop boards cannot use this module because they require unbuffered non-ECC DIMMs.

Registered ECC with 2Rx4 organisation

The single specification that decides fit is the registered ECC design with 2Rx4 organisation. Only motherboards that explicitly support registered ECC DDR3 at 1333 MHz will accept this module; mixing it with unbuffered memory prevents the system from posting. The 240-pin form factor and 1.5 V operation match the JEDEC DDR3 standard for the listed Supermicro platforms.

Simple DIMM installation with one common pitfall

Installation is a straightforward DIMM insertion into the 240-pin slots, but the most frequent error is populating slots in the wrong order for the specific Supermicro board. Consult the motherboard manual for the correct population sequence and ensure all modules in a channel share identical registered ECC specifications to avoid boot failures.

特長

  • ECC registered design protects data integrity in servers
  • 16 GB capacity extends memory headroom for virtualisation
  • DDR3 1333 MHz CL9 matches qualified platform specs
  • 240-pin registered DIMM fits Supermicro X8 series boards
  • 5 V operation meets JEDEC standard for compatibility

仕様

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DTL Series
Supermicro Motherboard X8DTN+ Series
Supermicro Motherboard X8DTT Series
Supermicro Motherboard X8DTU Series
Supermicro Motherboard X8OBN Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the 16GB capacity affect a Supermicro X8DTL system?

The single 16GB module adds 16GB of ECC registered memory to a compatible Supermicro X8DTL, X8DTN+, X8DTT, X8DTU or X8OBN motherboard, expanding total system memory for server or workstation workloads.

What does the PC3-10600 1333MHz CL9 rating limit in practice?

The DDR3 1333 PC3-10600 CL9 specification sets the maximum data rate at 1333 MT/s with a CAS latency of 9 cycles; the motherboard chipset and CPU memory controller determine the actual operating speed.

Will the 240-pin 1.5V registered DIMM fit my Supermicro X8DTN+ board?

Yes, the 240-pin DDR3 ECC registered DIMM at 1.5V matches the physical slot and voltage requirements of the listed Supermicro X8DTN+ series motherboards.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。