暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 16GB DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM for Dell PowerVault NX400

SKU CH-68EJ-6R9DF

16 GB DDR3L 1600 ECC registered RDIMM for Dell PowerVault NX400 servers

  • Capacity16GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 16GB capacity extends PowerVault NX400 memory headroom
  • DDR3L 1600 speed matches system specifications
  • 35V low voltage reduces power draw
  • Replaces Dell part numbers A6761613, A6994465, A7515505, A8255125, SNP20D6FC/16G

Dell PowerVault NX400 memory upgrade

This 16 GB DDR3L ECC registered DIMM is built for the Dell PowerVault NX400 storage server. It delivers 1600 MHz speed with CL11 latency at 1.35 V, adding capacity for virtualisation, file services or backup workloads. The module replaces Dell part numbers A6761613, A6994465, A7515505, A8255125 and SNP20D6FC/16G. Buyers who need unbuffered desktop memory cannot use this product.

240-pin registered ECC build quality

The stick uses a 240-pin DDR3L form factor with 2Rx4 organisation and no heat spreader, fitting directly into the server's registered DIMM slots. ECC and registered signalling protect data integrity in always-on environments, while the low-voltage 1.35 V operation matches the platform's power envelope. Mixing this module with unbuffered memory is not supported and will prevent boot.

Verify slot count and population rules

Confirm the PowerVault NX400 has free registered DIMM slots and check the system's maximum supported capacity per slot before ordering. The motherboard must accept 16 GB registered modules at DDR3L 1600; some configurations limit rank population or total memory. Buyers who need higher-density modules or a different voltage should not purchase this kit.

特長

  • ECC registered design protects data integrity in servers
  • 16GB capacity extends PowerVault NX400 memory headroom
  • DDR3L 1600 speed matches system specifications
  • 35V low voltage reduces power draw
  • Replaces Dell part numbers A6761613, A6994465, A7515505, A8255125, SNP20D6FC/16G

仕様

BrandOWC
Part Number1R6T32R416GB
Capacity16GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerVault NX400

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR3L 1600 PC3L-12800 interface actually run at in the Dell PowerVault NX400?

The module is rated for DDR3L 1600 (PC3L-12800) and will operate at that speed when the server's memory controller supports it.

Does the 240-pin ECC Registered RDIMM fit the Dell PowerVault NX400 memory slots without a riser?

Yes, the 240-pin DDR3L form factor matches the NX400 DIMM sockets directly; no riser or adapter is needed.

What is the correct installation sequence for this 2Rx4 registered module in the PowerVault NX400?

Power down the server, open the chassis, align the notch on the 240-pin RDIMM with the slot key, press firmly until both latches click, then power on. People often forget to fully seat both latches.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。