暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 ECC registered DIMM with black chips

OWC

OWC 1R3D32R416GB 16GB DDR3 1333 ECC Registered RDIMM memory upgrade

SKU CH-QFD4-AR1A6

A 16 GB DDR3 1333 ECC registered RDIMM for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi motherboards

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • 16 GB single module expands server capacity
  • ECC registered design protects data integrity in workstations
  • DDR3 1333 CL9 matches qualified Supermicro X8D series boards
  • 5 V 240-pin RDIMM drops into existing slots
  • 2Rx4 organisation optimises rank density for registered memory

ECC Registered Server Memory

This 16GB DDR3 1333 module is an ECC registered RDIMM built for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi series motherboards. It targets administrators extending the service life of existing workstation or server platforms that require registered error-correcting memory. The part replaces Supermicro MEMDR316LSL05ER13 and will not operate in standard desktop systems or alongside unbuffered DIMMs.

240-Pin DDR3 Form Factor

The module uses a 240-pin DDR3 interface at 1.5V with CL9 latency and a 2Rx4 organisation. Because it is registered, the memory controller sees a reduced electrical load, allowing larger total capacities on supported server boards. No heat spreader is fitted, so airflow across the DIMM slots handles cooling in typical rack or tower chassis. Mixing this registered stick with unbuffered memory is not supported.

Single-Module Upgrade Kit

The package contains one 16GB RDIMM, letting you add capacity in 16GB increments without purchasing matched pairs. OWC tests every module in-house and backs the part with a limited lifetime warranty and free technical support. The advanced replacement programme ships a replacement before the original is returned, reducing downtime for critical server workloads.

特長

  • 16 GB single module expands server capacity
  • ECC registered design protects data integrity in workstations
  • DDR3 1333 CL9 matches qualified Supermicro X8D series boards
  • 5 V 240-pin RDIMM drops into existing slots
  • 2Rx4 organisation optimises rank density for registered memory

仕様

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DT6 Series
Supermicro Motherboard X8DTE Series
Supermicro Motherboard X8DTG Series
Supermicro Motherboard X8DTH Series
Supermicro Motherboard X8DTi Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the PC3-10600 1333 MHz DDR3 interface limit this module to in real use?

The DDR3 PC3-10600 standard caps the data rate at 1333 MT/s with CL9 timing at 1.5 V, so the module cannot run faster than 1333 MHz regardless of the motherboard.

What physical slot and clearance does the 240-pin 16 GB RDIMM require?

It needs a standard 240-pin DDR3 DIMM socket; the registered design adds a buffer chip but keeps the same height as a regular DDR3 module, so no extra clearance is required.

How is the module installed and what step do builders often miss?

Align the notch with the key in the 240-pin slot, press straight down until both retention clips click, then verify in BIOS that the system sees the full 16 GB at 1333 MHz and that ECC registered mode is active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。