저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green 240-pin DDR3 ECC registered DIMM with black chips

OWC

OWC 1R3D32R416GB 16GB DDR3 1333 ECC Registered RDIMM memory upgrade

SKU CH-QFD4-AR1A6

A 16 GB DDR3 1333 ECC registered RDIMM for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi motherboards

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • 16 GB single module expands server capacity
  • ECC registered design protects data integrity in workstations
  • DDR3 1333 CL9 matches qualified Supermicro X8D series boards
  • 5 V 240-pin RDIMM drops into existing slots
  • 2Rx4 organisation optimises rank density for registered memory

ECC Registered Server Memory

This 16GB DDR3 1333 module is an ECC registered RDIMM built for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi series motherboards. It targets administrators extending the service life of existing workstation or server platforms that require registered error-correcting memory. The part replaces Supermicro MEMDR316LSL05ER13 and will not operate in standard desktop systems or alongside unbuffered DIMMs.

240-Pin DDR3 Form Factor

The module uses a 240-pin DDR3 interface at 1.5V with CL9 latency and a 2Rx4 organisation. Because it is registered, the memory controller sees a reduced electrical load, allowing larger total capacities on supported server boards. No heat spreader is fitted, so airflow across the DIMM slots handles cooling in typical rack or tower chassis. Mixing this registered stick with unbuffered memory is not supported.

Single-Module Upgrade Kit

The package contains one 16GB RDIMM, letting you add capacity in 16GB increments without purchasing matched pairs. OWC tests every module in-house and backs the part with a limited lifetime warranty and free technical support. The advanced replacement programme ships a replacement before the original is returned, reducing downtime for critical server workloads.

주요 특징

  • 16 GB single module expands server capacity
  • ECC registered design protects data integrity in workstations
  • DDR3 1333 CL9 matches qualified Supermicro X8D series boards
  • 5 V 240-pin RDIMM drops into existing slots
  • 2Rx4 organisation optimises rank density for registered memory

사양

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DT6 Series
Supermicro Motherboard X8DTE Series
Supermicro Motherboard X8DTG Series
Supermicro Motherboard X8DTH Series
Supermicro Motherboard X8DTi Series

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the PC3-10600 1333 MHz DDR3 interface limit this module to in real use?

The DDR3 PC3-10600 standard caps the data rate at 1333 MT/s with CL9 timing at 1.5 V, so the module cannot run faster than 1333 MHz regardless of the motherboard.

What physical slot and clearance does the 240-pin 16 GB RDIMM require?

It needs a standard 240-pin DDR3 DIMM socket; the registered design adds a buffer chip but keeps the same height as a regular DDR3 module, so no extra clearance is required.

How is the module installed and what step do builders often miss?

Align the notch with the key in the 240-pin slot, press straight down until both retention clips click, then verify in BIOS that the system sees the full 16 GB at 1333 MHz and that ECC registered mode is active.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.