OWC 32GB (4x8GB) DDR3L 1333 ECC Registered RDIMM Server RAM
- 32GB (4 x 8GB)
- 240-Pin DDR3L ECC R…
OWC
16 GB DDR4 ECC UDIMM running at 2666 MHz CL19 for workstations, servers and NAS systems
This single OWC module provides 16 GB of DDR4 memory rated at 2666 MHz with CL19 latency. It is built as an unbuffered ECC UDIMM for workstations, servers and NAS systems that require error-correcting code protection.
Verify that your motherboard accepts DDR4 ECC unbuffered DIMMs and runs at 1.2 V. The module is backward compatible with 2133 MHz and 2400 MHz bus speeds, so it will down-clock automatically if the platform does not support the full 2666 MHz rate.
The black printed-circuit board has no heat spreader and uses a standard 288-pin edge connector. Because it is unbuffered, it installs directly into any compatible desktop UDIMM slot without registered-buffer circuitry, keeping the memory path simple for daily operation.
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R816GB |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
It fits 288-pin DDR4 slots, but the board must support ECC unbuffered memory; many consumer desktops ignore ECC, so check the manual first.
Yes, it is backward compatible and will run at the slower speed of the slowest installed module.
No heat spreader is included; standard case airflow is sufficient for the 1.2 V JEDEC-rated module.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?