暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connector

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 240-pin UDIMM memory upgrade

SKU CH-6ZCH-7ET1J

A 2 GB DDR3 1333 MHz desktop DIMM for HP 8200 Elite SFF and Tower systems

  • Capacity2GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 2GB DDR3 1333 MHz module adds responsive multitasking capacity to HP 8200 Elite systems
  • CL9 latency at 1.5V delivers stable desktop performance without overclocking risk
  • JEDEC and RoHS compliant build ensures warranty-safe upgrade for supported workstations
  • Single-rank 1Rx8 unbuffered 240-pin UDIMM fits straight into standard DIMM slots
  • OWC in-house validation and lifetime warranty provide long-term reliability for daily workloads

Targeted DDR3 upgrade for HP 8200 Elite

This 2GB DDR3 1333 PC3-10600 CL9 module is built for HP 8200 Elite SFF and Tower desktops. The unbuffered 240-pin UDIMM fits the standard desktop DIMM slots on those systems. It provides a straightforward capacity increase for owners of those specific workstations.

Thermals and power in daily use

Operating at the JEDEC-standard 1.5V, the module draws minimal power and produces little heat. No heat spreader is fitted, relying on case airflow for passive cooling. Silent operation is assured because there are no moving parts or active cooling components.

What the bundle adds

The package contains the single memory module only. OWC validates every unit in-house and backs it with a limited lifetime warranty and free technical support. An advanced replacement program is available if a fault occurs. No software, cables or additional hardware are included.

特長

  • 2GB DDR3 1333 MHz module adds responsive multitasking capacity to HP 8200 Elite systems
  • CL9 latency at 1.5V delivers stable desktop performance without overclocking risk
  • JEDEC and RoHS compliant build ensures warranty-safe upgrade for supported workstations
  • Single-rank 1Rx8 unbuffered 240-pin UDIMM fits straight into standard DIMM slots
  • OWC in-house validation and lifetime warranty provide long-term reliability for daily workloads

仕様

BrandOWC
Part Number1U3D31R802GB
Capacity2GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP 8200 Elite SFF
HP 8200 Elite Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 240-pin UDIMM in my HP 8200 Elite, and which orientation step is often missed?

Align the notch on the module with the key in the slot, press firmly until both side clips click shut, and verify the module sits perfectly vertical — tilting it during insertion is the common error.

What maintenance or replacement will the 1.5V DDR3 module need over its service life?

No scheduled maintenance is required; keep the interior free of dust so the unbuffered DIMM stays cool, and replace the module only if memory diagnostics report errors.

What limit appears first when the CL9 1333MHz memory runs under sustained load?

The memory controller’s maximum supported frequency of 1333 MHz is the first ceiling; the module will not exceed this JEDEC-rated speed regardless of workload duration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。