我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green printed circuit board with black memory chips and gold edge connector

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 240-pin UDIMM memory upgrade

SKU CH-6ZCH-7ET1J

A 2 GB DDR3 1333 MHz desktop DIMM for HP 8200 Elite SFF and Tower systems

  • Capacity2GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 2GB DDR3 1333 MHz module adds responsive multitasking capacity to HP 8200 Elite systems
  • CL9 latency at 1.5V delivers stable desktop performance without overclocking risk
  • JEDEC and RoHS compliant build ensures warranty-safe upgrade for supported workstations
  • Single-rank 1Rx8 unbuffered 240-pin UDIMM fits straight into standard DIMM slots
  • OWC in-house validation and lifetime warranty provide long-term reliability for daily workloads

Targeted DDR3 upgrade for HP 8200 Elite

This 2GB DDR3 1333 PC3-10600 CL9 module is built for HP 8200 Elite SFF and Tower desktops. The unbuffered 240-pin UDIMM fits the standard desktop DIMM slots on those systems. It provides a straightforward capacity increase for owners of those specific workstations.

Thermals and power in daily use

Operating at the JEDEC-standard 1.5V, the module draws minimal power and produces little heat. No heat spreader is fitted, relying on case airflow for passive cooling. Silent operation is assured because there are no moving parts or active cooling components.

What the bundle adds

The package contains the single memory module only. OWC validates every unit in-house and backs it with a limited lifetime warranty and free technical support. An advanced replacement program is available if a fault occurs. No software, cables or additional hardware are included.

商品特色

  • 2GB DDR3 1333 MHz module adds responsive multitasking capacity to HP 8200 Elite systems
  • CL9 latency at 1.5V delivers stable desktop performance without overclocking risk
  • JEDEC and RoHS compliant build ensures warranty-safe upgrade for supported workstations
  • Single-rank 1Rx8 unbuffered 240-pin UDIMM fits straight into standard DIMM slots
  • OWC in-house validation and lifetime warranty provide long-term reliability for daily workloads

商品規格

BrandOWC
Part Number1U3D31R802GB
Capacity2GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP 8200 Elite SFF
HP 8200 Elite Tower

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 240-pin UDIMM in my HP 8200 Elite, and which orientation step is often missed?

Align the notch on the module with the key in the slot, press firmly until both side clips click shut, and verify the module sits perfectly vertical — tilting it during insertion is the common error.

What maintenance or replacement will the 1.5V DDR3 module need over its service life?

No scheduled maintenance is required; keep the interior free of dust so the unbuffered DIMM stays cool, and replace the module only if memory diagnostics report errors.

What limit appears first when the CL9 1333MHz memory runs under sustained load?

The memory controller’s maximum supported frequency of 1333 MHz is the first ceiling; the module will not exceed this JEDEC-rated speed regardless of workload duration.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。