暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge contacts

OWC

OWC 32GB DDR4 2933MHz ECC Registered RDIMM CL21 1.2V 2Rx4 288-Pin

SKU CH-ZEGM-PHF53

32 GB DDR4 2933 MHz ECC registered RDIMM for servers and workstations, CL21 1.2 V 2Rx4 288-pin, backward compatible with 2133, 2400 and 2666 MHz

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity expands server memory headroom
  • ECC registered design protects data integrity in critical workloads
  • DDR4 2933 MHz CL21 speed matches OEM specifications
  • 2 V operation reduces power draw per module
  • Backward compatible with 2133, 2400 and 2666 MHz systems

OWC 32GB DDR4 2933MHz ECC RDIMM

This 32GB DDR4 module runs at 2933MHz with CL21 latency and 1.2V operation. It is an ECC registered RDIMM built for servers, workstations and NAS systems. The 2Rx4 dual-rank design fits standard 288-pin DDR4 slots. It replaces Supermicro MEM-DR432L-SL01-ER29, MEM-DR432L-SL03-ER29 and MEM-DR432LC-ER29 parts.

Replaces slower DDR4 ECC RDIMMs

The module upgrades systems currently running 2133MHz, 2400MHz or 2666MHz DDR4 ECC registered memory. The jump is worth it when your workload benefits from the higher 2933MHz data rate and PC4-23400 bandwidth. It will not work in standard desktop computers that require unbuffered non-ECC memory. Builders needing unbuffered DIMMs or higher capacities per slot cannot use this registered module.

DDR4 288-pin registered interface limits

The 288-pin DDR4 registered form factor requires a motherboard with RDIMM support and a compatible memory controller. Mixing registered and unbuffered modules on the same channel is not supported. Maximum speed is determined by the platform's memory controller and populated slot count. Population rules for 2Rx4 modules may limit total channel capacity or achievable frequency on some server boards.

特長

  • 32 GB capacity expands server memory headroom
  • ECC registered design protects data integrity in critical workloads
  • DDR4 2933 MHz CL21 speed matches OEM specifications
  • 2 V operation reduces power draw per module
  • Backward compatible with 2133, 2400 and 2666 MHz systems

仕様

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo

この商品に関する質問

Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?

Yes, the module uses the standard 288-pin DDR4 registered DIMM form factor used in servers, workstations and NAS systems.

What is the correct seating procedure for the registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the module height is even; the step often missed is confirming both clips have fully engaged.

Will the 1.2 V DDR4 2933 MHz module need any firmware update or replacement interval?

No firmware update is required; the JEDEC-compliant 1.2 V DDR4 module runs at 2933 MHz (also backward compatible with 2133, 2400, 2666 MHz) and has no scheduled replacement interval.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。