OWC 32GB DDR4 3200 PC4-25600 CL22 2Rx4 288-pin ECC Registered RDIMM memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
OWC
32 GB DDR4 3200 ECC registered RDIMM for Gigabyte MP72-HB0, MU72-SU0, MU92-TU1, MZ01-CE0 and MZ01-CE1 systems
This 32 GB DDR4 3200 module is an ECC registered RDIMM built for Gigabyte MP72-HB0 MU72-SU0 MU92-TU1 MZ01-CE0 and MZ01-CE1 platforms. It targets administrators who need error-correcting memory for server, workstation or NAS workloads. Standard desktop boards cannot use this registered design and it must not be mixed with unbuffered or load-reduced DIMMs. The single 2Rx4 stick delivers 32 GB in one slot.
The module uses a 288-pin DDR4 interface at 1.2 V with CL22 timing and no heat spreader. Registered buffering places a register between the DRAM and the memory controller, reducing electrical load on the platform and allowing higher capacities per channel. Backward compatibility covers 2133 2400 2666 and 2933 MHz systems so the same DIMM can populate older slots. JEDEC and RoHS compliance ensures the stick meets industry electrical and environmental standards.
Before ordering confirm that your Gigabyte system lists ECC registered RDIMM support in its qualified vendor list. The platform must accept 2Rx4 organisation and 1.2 V operation at DDR4 3200 or a lower supported speed. Mixing this stick with unbuffered or load-reduced modules will prevent boot or cause instability. No desktop consumer motherboard can operate with this registered memory type.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Gigabyte MP72-HB0 Gigabyte MU72-SU0 Gigabyte MU92-TU1 Gigabyte MZ01-CE0 Gigabyte MZ01-CE1 |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The module follows the JEDEC DDR4 PC4-25600 standard and runs at 3200MHz; it will down-clock to 2133MHz, 2400MHz, 2666MHz or 2933MHz if the platform requires a lower speed.
It requires a standard 288-pin DDR4 DIMM slot in a server, workstation or NAS chassis; the registered design and 2Rx4 organisation mean it will not fit or function in unbuffered desktop boards.
Power down the system, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify the firmware recognises the full 32GB at 3200MHz; the common mistake is mixing this registered ECC module with unbuffered or load-reduced DIMMs, which prevents boot.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?