暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 4GB DDR3 1066 PC3-8500 CL7 2Rx8 240-pin 1.5V Non-ECC UDIMM Dell Studio XPS 435 9000

SKU CH-17PK-N9E2B

A 4 GB DDR3 1066 CL7 UDIMM upgrade for Dell Studio XPS 435 and 9000 desktops

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • 4GB capacity adds responsive multitasking headroom for Dell Studio XPS 435 and 9000
  • DDR3 1066 PC3-8500 CL7 matches factory speed and timing specs exactly
  • 5V JEDEC-standard voltage ensures stable, warranty-safe operation
  • 240-pin unbuffered non-ECC UDIMM drops straight into desktop DIMM slots
  • 2Rx8 dual-rank organisation delivers full 4GB density in a single module

OWC 4GB DDR3 module for Dell Studio XPS

This single 4GB DDR3 1066 PC3-8500 CL7 240-pin UDIMM is built specifically for Dell Studio XPS 435 and 9000 desktops. It runs at 1.5V with CL7 latency and a 2Rx8 unbuffered layout. The module targets owners of those systems who need a straightforward capacity increase without configuration changes.

Thermals noise and power in normal use

Operating at the standard 1.5V JEDEC voltage, the stick draws no more power than the factory memory it replaces. No heat spreader is fitted, so airflow through the Dell chassis handles cooling silently. The unbuffered design adds no active components that could generate extra noise or heat.

Upgrade path and when it matters

This module replaces or supplements the original DDR3 memory in compatible Studio XPS towers, raising total capacity for smoother multitasking and larger file handling. The jump is worth it when the system currently runs with less than the maximum supported memory and daily workloads feel sluggish. It is not for builders needing ECC, registered DIMMs, or speeds beyond 1066MHz.

特長

  • 4GB capacity adds responsive multitasking headroom for Dell Studio XPS 435 and 9000
  • DDR3 1066 PC3-8500 CL7 matches factory speed and timing specs exactly
  • 5V JEDEC-standard voltage ensures stable, warranty-safe operation
  • 240-pin unbuffered non-ECC UDIMM drops straight into desktop DIMM slots
  • 2Rx8 dual-rank organisation delivers full 4GB density in a single module

仕様

BrandOWC
Part Number8U5D32R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell Studio XPS 435
Dell Studio XPS 9000

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 240-pin DDR3 module in my Dell Studio XPS 435?

Power off the PC, open the case, align the notch on the 240-pin DDR3 DIMM with the slot key, press firmly until both retention clips click, then close the case and power on.

Will the 1.5V DDR3 module need any maintenance or replacement later?

No routine maintenance is required; the JEDEC-standard 1.5V DDR3 module is built for long-term operation and is covered by OWC's limited lifetime warranty if a fault ever develops.

What thermal limit appears first when the 4GB DDR3 1066 CL7 kit runs sustained workloads?

The module has no heat spreader, so the DRAM chips reach their maximum rated junction temperature before any other component, making case airflow the limiting factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。