暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 1Rx8 240-pin 1.5V UDIMM memory upgrade for Dell OptiPlex 790

SKU CH-046V-4DEWF

4GB DDR3-1333 UDIMM upgrade for Dell OptiPlex 790 desktop, SFF, Tower and USFF systems

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 4GB capacity adds multitasking headroom for everyday workloads
  • DDR3 1333 PC3-10600 CL9 matches Dell OptiPlex 790 specifications
  • 240-pin UDIMM form factor fits Desktop SFF Tower USFF models
  • 5V non-ECC unbuffered design ensures stable operation
  • JEDEC and RoHS compliant for warranty-safe upgrade

OWC 4GB DDR3 1333 UDIMM for OptiPlex 790

This single 4GB DDR3 module runs at 1333MHz with CL9 latency and 1.5V operation. It uses a 240-pin unbuffered non-ECC design built to JEDEC standards. The upgrade targets Dell OptiPlex 790 Desktop, SFF, Tower and USFF owners who need a straightforward capacity increase.

Suits owners of listed OptiPlex 790 models adding

The module fits only systems that accept DDR3 240-pin UDIMMs at this speed and voltage. Buyers whose motherboards require registered or ECC memory cannot use it. Those needing more than 4GB per slot should look at higher-density modules.

240-pin DDR3 1333 non-ECC unbuffered UDIMM

This form factor and signalling standard is the sole determinant of mechanical and electrical compatibility. Verify the host system supports PC3-10600 unbuffered memory before purchase.

特長

  • 4GB capacity adds multitasking headroom for everyday workloads
  • DDR3 1333 PC3-10600 CL9 matches Dell OptiPlex 790 specifications
  • 240-pin UDIMM form factor fits Desktop SFF Tower USFF models
  • 5V non-ECC unbuffered design ensures stable operation
  • JEDEC and RoHS compliant for warranty-safe upgrade

仕様

BrandOWC
Part Number1U3D31R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 790 Desktop
Dell OptiPlex 790 SFF
Dell OptiPlex 790 Tower
Dell OptiPlex 790 USFF

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1.5V DDR3 1333 CL9 module hit a thermal limit first during sustained all-day workloads?

This 4GB DDR3 1333 PC3-10600 CL9 UDIMM runs at standard JEDEC 1.5V without a heat spreader; the first sustained-use limit is the memory controller's maximum supported frequency and total capacity for the OptiPlex 790 platform.

How much heat or noise does the 240-pin unbuffered DIMM add when the system runs continuously?

The module has no heat spreader and no active cooling; it adds negligible heat and zero noise, with power draw governed by the 1.5V DDR3 1333 specification under load.

What must the Dell OptiPlex 790 already have — free 240-pin slots and BIOS support — for this 4GB 1Rx8 upgrade to work?

A compatible OptiPlex 790 Desktop, SFF, Tower or USFF with an available 240-pin DDR3 slot and BIOS that recognises 4GB 1Rx8 PC3-10600 CL9 modules at 1.5V.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。