OWC 64GB DDR4 3200 ECC Registered DIMM 2Rx4 CL22 1.2V 288-pin memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
OWC
64 GB DDR4-2666 ECC registered DIMM for Fujitsu PRIMERGY CX2550 M4, CX2560 M4, CX2570 M4, RX2530 M4 and RX2540 M4 servers
Capacity 64GB
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
This 64GB DDR4 2666 ECC Registered DIMM is built for Fujitsu PRIMERGY servers including the CX2550 M4, CX2560 M4, CX2570 M4, RX2530 M4 and RX2540 M4. It runs at PC4-21300 speed with CL19 latency and 1.2V operation. The 4Rx4 organisation and 288-pin form factor match the OEM part numbers S26361F4026L764, S26361-F4026-L364, S26361F4026E764, S26361-F4026-E364 and S26361F4026E364. It will not work in standard desktop computers.
Operating at 1.2V, the module draws minimal power and generates little heat in normal server workloads. No heat spreader is fitted, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw stable. The JEDEC-compliant design runs silently with no moving parts.
The single 64GB stick replaces multiple smaller modules, freeing DIMM slots for future expansion. Backward compatibility with 2133MHz and 2400MHz systems allows installation in older PRIMERGY platforms without configuration changes. ECC Registered operation adds error detection and correction for data integrity in critical workloads. The module cannot be mixed with unbuffered or load-reduced memory types.
| Brand | OWC |
|---|---|
| Part Number | 2R6D44R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Fujitsu PRIMERGY CX2550 M4 Fujitsu PRIMERGY CX2560 M4 Fujitsu PRIMERGY CX2570 M4 Fujitsu PRIMERGY RX2530 M4 Fujitsu PRIMERGY RX2540 M4 |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Power off the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then confirm the firmware recognises the full 64GB at 2666MHz.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so replacement only occurs if a memory error appears or capacity must be increased beyond the server's maximum supported DIMM count.
The memory controller's maximum supported rank-per-channel and total capacity ceiling will be reached before the module's own 2666MHz CL19 rating becomes a bottleneck.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?