OWC 64GB DDR4 3200 ECC Registered DIMM 2Rx4 CL22 1.2V 288-pin memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
OWC
64 GB DDR4-2666 ECC registered DIMM for Fujitsu PRIMERGY CX2550 M4, CX2560 M4, CX2570 M4, RX2530 M4 and RX2540 M4 servers
Capacity 64GB
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
This 64GB DDR4 2666 ECC Registered DIMM is built for Fujitsu PRIMERGY servers including the CX2550 M4, CX2560 M4, CX2570 M4, RX2530 M4 and RX2540 M4. It runs at PC4-21300 speed with CL19 latency and 1.2V operation. The 4Rx4 organisation and 288-pin form factor match the OEM part numbers S26361F4026L764, S26361-F4026-L364, S26361F4026E764, S26361-F4026-E364 and S26361F4026E364. It will not work in standard desktop computers.
Operating at 1.2V, the module draws minimal power and generates little heat in normal server workloads. No heat spreader is fitted, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw stable. The JEDEC-compliant design runs silently with no moving parts.
The single 64GB stick replaces multiple smaller modules, freeing DIMM slots for future expansion. Backward compatibility with 2133MHz and 2400MHz systems allows installation in older PRIMERGY platforms without configuration changes. ECC Registered operation adds error detection and correction for data integrity in critical workloads. The module cannot be mixed with unbuffered or load-reduced memory types.
| Brand | OWC |
|---|---|
| Part Number | 2R6D44R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Fujitsu PRIMERGY CX2550 M4 Fujitsu PRIMERGY CX2560 M4 Fujitsu PRIMERGY CX2570 M4 Fujitsu PRIMERGY RX2530 M4 Fujitsu PRIMERGY RX2540 M4 |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Power off the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then confirm the firmware recognises the full 64GB at 2666MHz.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so replacement only occurs if a memory error appears or capacity must be increased beyond the server's maximum supported DIMM count.
The memory controller's maximum supported rank-per-channel and total capacity ceiling will be reached before the module's own 2666MHz CL19 rating becomes a bottleneck.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?