暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black DDR3 DIMMs without heat spreaders, 240-pin, ECC unbuffered, 8GB kit

OWC

OWC 8GB (2x4GB) DDR3 1600 ECC Unbuffered UDIMM desktop RAM

SKU CH-HF10-1WNF8

An 8 GB dual-channel DDR3 1600 kit with ECC error correction for desktops, workstations and servers

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 2×4 GB kit boosts multitasking bandwidth
  • JEDEC-standard 1600 MHz CL11 timing ensures broad compatibility
  • 5 V unbuffered DDR3 modules install without extra cooling
  • 240-pin UDIMM form factor fits desktops, workstations and servers

DDR3 ECC UDIMM kit for workstations and servers

This kit provides two 4 GB unbuffered DIMMs giving a total of 8 GB of DDR3 memory rated at 1600 MT/s with CL11 latency. It is built for desktop workstations, servers and NAS systems that require error-correcting code memory. The modules operate at the standard 1.5 V and use the 240-pin UDIMM form factor. No heat spreaders are included.

Verify DDR3 ECC unbuffered support before purchase

Confirm that your motherboard or system accepts DDR3 ECC unbuffered UDIMMs and has two free 240-pin slots for dual-channel operation. The platform must be able to run memory at 1.5 V and support the PC3-12800 speed grade. Check the vendor’s qualified-vendor list or manual for the exact part number 1E6D32R8008P to ensure compatibility. Do not install in systems that require registered or load-reduced DIMMs.

JEDEC and RoHS compliance simplify deployment

Each module meets JEDEC-standard specifications and is RoHS compliant, so the upgrade is warranty-safe for most OEM workstations and servers. The dual-channel kit is packaged as a matched pair to avoid timing mismatches during installation. OWC tests every module in-house and backs the kit with a limited lifetime warranty and free technical support. No additional software or drivers are required.

特長

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 2×4 GB kit boosts multitasking bandwidth
  • JEDEC-standard 1600 MHz CL11 timing ensures broad compatibility
  • 5 V unbuffered DDR3 modules install without extra cooling
  • 240-pin UDIMM form factor fits desktops, workstations and servers

仕様

BrandOWC
Part Number1E6D32R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and do I need to buy anything else to install these modules?

The kit includes two 4 GB DDR3 1600 ECC unbuffered UDIMMs, a 240-pin dual-channel pair totalling 8 GB. No extra parts are required for installation in a compatible desktop, workstation or server.

Why choose this 8 GB dual-channel kit instead of a single 8 GB stick?

The matched 2×4 GB pair runs in dual-channel mode, doubling memory bandwidth over a single module and providing the ECC error correction needed for workstation and server workloads.

What does the PC3-12800 1600 MHz CL11 rating mean for my system's actual performance?

PC3-12800 indicates a peak transfer rate of 12 800 MB/s at 1 600 MHz with CAS latency 11, giving low-latency ECC throughput for multi-tasking and large-file workloads on supported platforms.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。