저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two black DDR3 DIMMs without heat spreaders, 240-pin, ECC unbuffered, 8GB kit

OWC

OWC 8GB (2x4GB) DDR3 1600 ECC Unbuffered UDIMM desktop RAM

SKU CH-HF10-1WNF8

An 8 GB dual-channel DDR3 1600 kit with ECC error correction for desktops, workstations and servers

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 2×4 GB kit boosts multitasking bandwidth
  • JEDEC-standard 1600 MHz CL11 timing ensures broad compatibility
  • 5 V unbuffered DDR3 modules install without extra cooling
  • 240-pin UDIMM form factor fits desktops, workstations and servers

DDR3 ECC UDIMM kit for workstations and servers

This kit provides two 4 GB unbuffered DIMMs giving a total of 8 GB of DDR3 memory rated at 1600 MT/s with CL11 latency. It is built for desktop workstations, servers and NAS systems that require error-correcting code memory. The modules operate at the standard 1.5 V and use the 240-pin UDIMM form factor. No heat spreaders are included.

Verify DDR3 ECC unbuffered support before purchase

Confirm that your motherboard or system accepts DDR3 ECC unbuffered UDIMMs and has two free 240-pin slots for dual-channel operation. The platform must be able to run memory at 1.5 V and support the PC3-12800 speed grade. Check the vendor’s qualified-vendor list or manual for the exact part number 1E6D32R8008P to ensure compatibility. Do not install in systems that require registered or load-reduced DIMMs.

JEDEC and RoHS compliance simplify deployment

Each module meets JEDEC-standard specifications and is RoHS compliant, so the upgrade is warranty-safe for most OEM workstations and servers. The dual-channel kit is packaged as a matched pair to avoid timing mismatches during installation. OWC tests every module in-house and backs the kit with a limited lifetime warranty and free technical support. No additional software or drivers are required.

주요 특징

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 2×4 GB kit boosts multitasking bandwidth
  • JEDEC-standard 1600 MHz CL11 timing ensures broad compatibility
  • 5 V unbuffered DDR3 modules install without extra cooling
  • 240-pin UDIMM form factor fits desktops, workstations and servers

사양

BrandOWC
Part Number1E6D32R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What comes in the box and do I need to buy anything else to install these modules?

The kit includes two 4 GB DDR3 1600 ECC unbuffered UDIMMs, a 240-pin dual-channel pair totalling 8 GB. No extra parts are required for installation in a compatible desktop, workstation or server.

Why choose this 8 GB dual-channel kit instead of a single 8 GB stick?

The matched 2×4 GB pair runs in dual-channel mode, doubling memory bandwidth over a single module and providing the ECC error correction needed for workstation and server workloads.

What does the PC3-12800 1600 MHz CL11 rating mean for my system's actual performance?

PC3-12800 indicates a peak transfer rate of 12 800 MB/s at 1 600 MHz with CAS latency 11, giving low-latency ECC throughput for multi-tasking and large-file workloads on supported platforms.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.