暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 8GB DDR3 1600 PC3-12800 CL11 2Rx8 204-pin 1.5V Non-ECC SODIMM for HP Elite 8300 AIO

SKU CH-BTC4-AMTJF

8GB DDR3 1600 SODIMM upgrades HP Elite 8300 AIO with JEDEC-standard 1.5V non-ECC memory

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB capacity lets you run more apps simultaneously
  • DDR3 1600 speed matches HP Elite 8300 AIO spec
  • CL11 latency keeps data flowing smoothly
  • 5V JEDEC standard protects system stability
  • 204-pin SODIMM fits the all-in-one slot directly

HP Elite 8300 AIO memory upgrade

This 8 GB DDR3 SODIMM is built specifically for the HP Elite 8300 all-in-one desktop. It provides a straightforward capacity increase for owners of that system who need more memory for everyday workloads. The module is not intended for laptops, standard desktops or other all-in-one models that use different pin layouts or voltage requirements.

DDR3 1600 CL11 1.5 V specification

The module runs at 1600 MHz with a CAS latency of 11 and operates at the standard 1.5 V for DDR3 SODIMMs. This exact speed, timing and voltage combination is the single parameter that determines whether the Elite 8300 AIO will recognise and stabilise the memory. Systems requiring 1.35 V low-voltage DDR3 or a different frequency will not be compatible with this part.

JEDEC and RoHS compliance with lifetime support

The stick meets JEDEC standards and is RoHS compliant, ensuring a warranty-safe upgrade that matches OEM specifications. OWC backs the module with a limited lifetime warranty and free technical support, while an advanced replacement programme reduces downtime if a fault occurs. No heat spreader, software utilities or additional accessories are included in the package.

特長

  • 8GB capacity lets you run more apps simultaneously
  • DDR3 1600 speed matches HP Elite 8300 AIO spec
  • CL11 latency keeps data flowing smoothly
  • 5V JEDEC standard protects system stability
  • 204-pin SODIMM fits the all-in-one slot directly

仕様

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Elite 8300 AIO

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will a single 8 GB DDR3-1600 module running at CL11 deliver the rated 12 800 MB/s bandwidth inside my HP Elite 8300 AIO?

The module is rated PC3-12800, so its peak transfer rate is 12 800 MB/s; actual throughput depends on the memory controller and whether the system runs in single- or dual-channel mode.

What does the PC3-12800 label tell me about the speed ceiling on this SODIMM?

PC3-12800 is the JEDEC designation for DDR3-1600, meaning the module is validated to run at 1 600 MT/s with CL11 timings at 1.5 V.

Does the 204-pin layout match the slots in an HP Elite 8300 all-in-one?

Yes, the stick uses the standard 204-pin DDR3 SODIMM form factor specified for the Elite 8300 AIO.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。