暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Gray 15-inch fanless all-in-one panel PC with IP65 resistive touchscreen and aluminum alloy chassis

partaker

partaker A27 15" IP65 resistive touch i5-4200U 16GB 256GB AI edge system

SKU CH-QS62-8SYWK

A 15 inch IP65 resistive touch panel PC with an Intel Core i5-4200U, 16GB DDR3 and 256GB storage for industrial edge AI

  • TypeAll-in-One PC
  • Form FactorAll-in-One
  • ColorGray
  • Operating SystemWindows 10 Pro
  • CPU TypeIntel Core i5 4th Gen
  • CPU NameIntel Core i5-4200U

A27 15" Resistive I5 4200U 16GB RAM / 256GB SSD

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium chassis runs silently without moving parts
  • Dual Gigabit LAN ports enable redundant network connections
  • Resistive touchscreen rated for 50 million touch cycles
  • 16 GB DDR3 memory supports multitasking workloads

Industrial 15-inch Panel PC

The Partaker A27 is a 15-inch all-in-one industrial panel PC built around an Intel Core i5-4200U processor running up to 2.60 GHz. It ships with Windows 10 Pro, 16 GB of DDR3 memory and a 256 GB mSATA drive. The IP65-rated front panel resists dust and water jets, while the fanless aluminium chassis operates silently from -20 °C to +60 °C.

Suited for embedded automation

This unit fits machine builders who need a compact, sealed touchscreen computer with dual Gigabit Ethernet, two configurable RS232/485 serial ports and four USB interfaces. The resistive touch panel withstands 50 million touches and works with gloves. Buyers who require a capacitive multi-touch surface, higher-resolution graphics or a different mounting cutout should evaluate alternative models.

1024×768 resistive touchscreen decides fit

The 15-inch TFT LCD delivers a 4:3 aspect ratio at 1024×768 resolution with 350 cd/m² brightness. The default resistive layer supports stylus and gloved input, while an optional capacitive variant is available. Verify that this resolution, aspect ratio and touch technology match the HMI software and operator workflow before purchase.

特長

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium chassis runs silently without moving parts
  • Dual Gigabit LAN ports enable redundant network connections
  • Resistive touchscreen rated for 50 million touch cycles
  • 16 GB DDR3 memory supports multitasking workloads

仕様

TypeAll-in-One PC
Form FactorAll-in-One
ColorGray
Operating SystemWindows 10 Pro
CPU TypeIntel Core i5 4th Gen
CPU NameIntel Core i5-4200U
Screen Size15"
Screen TypeMulti-Touch Screen

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 1024×768 resistive touchscreen limit in practice?

The 4:3 aspect panel resolves to 1024×768 and the resistive layer registers one touch point at a time, so multi-touch gestures are not supported and fine stylus work is the practical ceiling.

What panel cutout and depth does the IP65 front need to seal properly?

The front bezel seals in a 355×279 mm cutout; the fanless aluminum chassis sits behind that opening, so allow enough rear clearance for the DC12V inlet, dual Gigabit LAN, HDMI, two COM ports, four USB ports and audio jack.

How is Windows 10 Pro installed on the mSATA drive, and what step do builders miss?

The board boots from the single mSATA slot; insert the drive before first power-on, enable the AMI EFI BIOS boot entry for that slot, and remember to connect the LVDS cable that is already wired to the LCD or the installer will show no display.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。