暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White vertical GPU bracket with angled PCIe 5.0 riser cable and D-RGB light strip

Phanteks

Phanteks PH-PGPUKT5.0_DWT01 vertical GPU bracket PCIe 5.0 220 mm white

SKU CH-331V-Q1H90 MPN PH-PGPUKT5.0_DWT01

Vertically mounts a graphics card at up to 30 degrees with full PCIe 5.0 bandwidth and integrated D-RGB lighting

  • SpecificationsDimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inche

Option Gen5 White

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Vertical GPU mounting with up to 30 degree tilt for showcase builds
  • Full PCIe 5.0 x16 bandwidth keeps GPU performance unrestricted
  • Secure bracket physically locks graphics card in place preventing sag
  • Integrated D-RGB lighting with smooth diffusion enhances system aesthetics
  • Fits any chassis with 7 open PCI slots for broad compatibility

Vertical GPU bracket with PCIe 5.0

The Phanteks PH-PGPUKT5.0_DWT01 is a vertical mounting kit for graphics cards that supports PCIe 5.0 x16 signalling. It fits cases with seven open expansion slots and includes integrated D-RGB lighting with smooth diffusion. The bracket is built from powder-coated steel and ABS plastic in a white finish.

Check case slots and GPU clearance

Verify that your chassis provides seven contiguous rear slots and enough internal depth for the bracket footprint of 347 by 146 by 141 millimetres. The mounting system secures the card physically to the bracket and allows tilt angles up to 30 degrees, so confirm the graphics card power connectors and cooler shroud will not interfere with side panels or other components.

For showcase builds needing Gen5 bandwidth

This bracket suits builders who want to display a graphics card vertically while preserving full PCIe 5.0 throughput and adding addressable lighting. It is not intended for cases with fewer than seven slots, for compact chassis that cannot accommodate the stated dimensions, or for installations where a riser cable is preferred over a rigid bracket.

特長

  • Vertical GPU mounting with up to 30 degree tilt for showcase builds
  • Full PCIe 5.0 x16 bandwidth keeps GPU performance unrestricted
  • Secure bracket physically locks graphics card in place preventing sag
  • Integrated D-RGB lighting with smooth diffusion enhances system aesthetics
  • Fits any chassis with 7 open PCI slots for broad compatibility

仕様

BrandPhanteks
ModelPH-PGPUKT5.0_DWT01
SpecificationsDimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
配送重量1.32 kg
梱包サイズ356 × 191 × 168 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the Phanteks PH-PGPUKT5.0_DWT01 include the PCIe 5.0 riser cable or must it be purchased separately?

The bracket is a mounting kit only; the PCIe 5.0 riser cable is not included and must be bought separately.

Which chassis layout is required for the 220 mm Phanteks vertical GPU bracket?

Any case with a 7-slot open PCI area supports this 220 mm bracket; no specific version choice exists.

What does the PCIe 5.0 x16 rating mean for my graphics card once the bracket is installed?

The Gen 5.0 x16 riser maintains full bandwidth so the GPU runs at its native speed without bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。