저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
White vertical GPU bracket with angled PCIe 5.0 riser cable and D-RGB light strip

Phanteks

Phanteks PH-PGPUKT5.0_DWT01 vertical GPU bracket PCIe 5.0 220 mm white

SKU CH-331V-Q1H90 MPN PH-PGPUKT5.0_DWT01

Vertically mounts a graphics card at up to 30 degrees with full PCIe 5.0 bandwidth and integrated D-RGB lighting

  • SpecificationsDimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inche

Option Gen5 White

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Vertical GPU mounting with up to 30 degree tilt for showcase builds
  • Full PCIe 5.0 x16 bandwidth keeps GPU performance unrestricted
  • Secure bracket physically locks graphics card in place preventing sag
  • Integrated D-RGB lighting with smooth diffusion enhances system aesthetics
  • Fits any chassis with 7 open PCI slots for broad compatibility

Vertical GPU bracket with PCIe 5.0

The Phanteks PH-PGPUKT5.0_DWT01 is a vertical mounting kit for graphics cards that supports PCIe 5.0 x16 signalling. It fits cases with seven open expansion slots and includes integrated D-RGB lighting with smooth diffusion. The bracket is built from powder-coated steel and ABS plastic in a white finish.

Check case slots and GPU clearance

Verify that your chassis provides seven contiguous rear slots and enough internal depth for the bracket footprint of 347 by 146 by 141 millimetres. The mounting system secures the card physically to the bracket and allows tilt angles up to 30 degrees, so confirm the graphics card power connectors and cooler shroud will not interfere with side panels or other components.

For showcase builds needing Gen5 bandwidth

This bracket suits builders who want to display a graphics card vertically while preserving full PCIe 5.0 throughput and adding addressable lighting. It is not intended for cases with fewer than seven slots, for compact chassis that cannot accommodate the stated dimensions, or for installations where a riser cable is preferred over a rigid bracket.

주요 특징

  • Vertical GPU mounting with up to 30 degree tilt for showcase builds
  • Full PCIe 5.0 x16 bandwidth keeps GPU performance unrestricted
  • Secure bracket physically locks graphics card in place preventing sag
  • Integrated D-RGB lighting with smooth diffusion enhances system aesthetics
  • Fits any chassis with 7 open PCI slots for broad compatibility

사양

BrandPhanteks
ModelPH-PGPUKT5.0_DWT01
SpecificationsDimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
배송 무게1.32 kg
포장 크기356 × 191 × 168 mm

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the Phanteks PH-PGPUKT5.0_DWT01 include the PCIe 5.0 riser cable or must it be purchased separately?

The bracket is a mounting kit only; the PCIe 5.0 riser cable is not included and must be bought separately.

Which chassis layout is required for the 220 mm Phanteks vertical GPU bracket?

Any case with a 7-slot open PCI area supports this 220 mm bracket; no specific version choice exists.

What does the PCIe 5.0 x16 rating mean for my graphics card once the bracket is installed?

The Gen 5.0 x16 riser maintains full bandwidth so the GPU runs at its native speed without bottleneck.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.