暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Full-height dual-slot workstation graphics card, silver cooler, four DisplayPort and one USB-C output

PNY Technologies, Inc.

PNY Technologies, Inc. 5.1 Quadro RTX 8000 48GB GDDR6 ECC workstation graphics card

SKU CH-6B46-1WZ7B MPN 5.1

Workstation GPU with 48 GB GDDR6 ECC memory, 4,608 CUDA cores and 576 Tensor cores for AI and rendering workloads

  • Memory TypeGDDR6
  • 48 GB GDDR6 ECC memory protects large datasets from corruption
  • 4,608 CUDA cores deliver 16.3 TFLOPS single-precision performance for compute workloads
  • 576 Tensor cores provide 130.5 TFLOPS tensor performance for AI acceleration
  • 72 RT cores with 100 GB/s NVLink bandwidth enable multi-GPU scaling
  • Four DisplayPort 1.4 and VirtualLink outputs drive up to four 4K displays at 120 Hz

Professional visual computing card

The PNY Quadro RTX 8000 delivers 48 GB of GDDR6 memory with ECC protection and a 384-bit interface for demanding visual computing workloads. It provides 4,608 CUDA cores, 576 Tensor cores and 72 RT cores connected through a PCI Express 3.0 x16 slot. Four DisplayPort 1.4 outputs and one VirtualLink connector support up to four simultaneous displays at high resolutions.

Studios needing maximum frame-buffer capacity

This card suits professionals who require 48 GB of GPU memory for large datasets, complex rendering or multi-application workflows. It is not suited for buyers who need more storage than the card provides or builders who require a second card for NVLink scaling beyond two GPUs. Gamers seeking higher single-precision throughput per pound should evaluate alternatives.

Verify power and physical clearance

Confirm the power supply can deliver the 295 W total board power with the required connectors before ordering. Ensure the chassis accommodates the 4.4 H x 10.5 L dual-slot form factor and that the motherboard offers a full-length PCIe 3.0 x16 slot. Check that display cables match the four DisplayPort 1.4 and VirtualLink outputs.

特長

  • 48 GB GDDR6 ECC memory protects large datasets from corruption
  • 4,608 CUDA cores deliver 16.3 TFLOPS single-precision performance for compute workloads
  • 576 Tensor cores provide 130.5 TFLOPS tensor performance for AI acceleration
  • 72 RT cores with 100 GB/s NVLink bandwidth enable multi-GPU scaling
  • Four DisplayPort 1.4 and VirtualLink outputs drive up to four 4K displays at 120 Hz

仕様

Memory TypeGDDR6

この商品に関する質問

What power supply capacity is needed for the 295 W total board power?

A power supply rated above 295 W with a PCIe 3.0 x16 slot and sufficient 8-pin or 12-pin connectors will deliver the 295 W total board power.

Can I run this card in a PCIe 3.0 x16 slot alongside an older PCIe 2.0 GPU?

Yes, the card operates at PCIe 3.0 x16 and will coexist with a PCIe 2.0 GPU; each device runs at its own link speed.

How do I confirm the 48 GB GDDR6 ECC memory is active after installation?

GPU-Z or NVIDIA SMI will report 48 GB GDDR6 with ECC enabled, and the driver control panel shows the memory configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。