暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey ATX power supply unit with single fan

Replace Power

Replace Power power supply for HP Pavilion 510-P030

SKU CH-P8D1-2VQY5

ATX power supply with 20+4 pin, 12V 4-pin, three SATA and one 6-pin connector for HP Pavilion 510-P030 DT PC

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight1
  • Replacement upgrade for HP Pavilion 510-P030
  • Single fan provides active cooling
  • 20+4 pin ATX connector fits motherboard
  • +12 V 4-pin connector powers CPU
  • Three SATA connectors support storage drives

Replacement PSU for HP Pavilion 510-P030

This Replace Power ATX unit is built as a direct swap for the HP Pavilion 510-P030 desktop. It delivers the standard 20+4 pin ATX connector, a +12V 4-pin CPU plug, three SATA power leads and one 6-pin connector for a graphics card. The grey chassis holds a single fan and weighs 1 kg.

Upgrading from a failed or undersized factory unit

If the original supply has died or cannot feed a new GPU, this replacement restores reliable power with the exact connector mix the motherboard expects. The jump is worth it when the system refuses to boot, shuts down under load or when a discrete card needs the 6-pin lead the old PSU lacked.

Straightforward ATX swap with fixed cables

Installation follows the usual ATX routine: unplug the old unit, remove four screws, fit the new one and reconnect the keyed plugs. The fixed cable set means no modular wiring errors, but builders who need more SATA ports or a second 6-pin lead will find the harness limiting.

特長

  • Replacement upgrade for HP Pavilion 510-P030
  • Single fan provides active cooling
  • 20+4 pin ATX connector fits motherboard
  • +12 V 4-pin connector powers CPU
  • Three SATA connectors support storage drives

仕様

BrandReplace Power
ColorGrey
TypeATX
Fans1
Weight1

この商品に関する質問

Will the 20+4 pin ATX connector and the +12V 4-pin power connector reach the motherboard headers in an HP Pavilion 510-P030 case?

The unit supplies a standard 20+4 pin ATX connector and a +12V 4-pin power connector, both sized for ATX motherboards used in the Pavilion 510-P030 chassis.

Do I need to remove the existing power supply bracket before sliding this unit into the Pavilion 510-P030?

Yes, unscrew the original PSU bracket from the chassis, then slide the replacement unit in and secure it with the same screws.

How many SATA drives can I power later if I add more storage?

The power supply provides three SATA connectors, so up to three SATA drives can be powered simultaneously.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。