BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
RIMLANCE
An 8 GB DDR3 desktop module running at 1333 MHz with 1.35 V operation and a 240-pin UDIMM form factor
This 8GB unbuffered DIMM runs at 1333MHz PC3-10600 with a CAS latency of CL9. It operates at 1.35V and uses a standard 240-pin layout for desktop systems. The module is non-ECC and built with major-brand chipsets for general desktop use.
Verify that your motherboard accepts DDR3 memory and can run modules at 1.35V. Confirm an empty 240-pin DIMM slot is available and that the board supports 1333MHz PC3-10600 speeds. The module is unbuffered and non-ECC, so it will not work in servers requiring registered or error-correcting memory.
Standard DDR3 UDIMMs run passively with no fan, so they produce no audible noise. Power draw is low at the rated 1.35V and typical desktop workloads keep temperatures within normal operating limits. Adequate case airflow is sufficient to maintain stable operation.
| Brand | RIMLANCE |
|---|---|
| Model | RUD10600LD8C8 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
The module uses the standard 240-pin DDR3 UDIMM form factor, so it fits any desktop board with a DDR3 slot that accepts unbuffered, non-ECC memory at 1.35 V.
It delivers a peak transfer rate of 10600 MB/s at CL9 latency, giving noticeable snappier multitasking and smoother application switching on compatible DDR3 systems.
Yes, provided the board has a free DDR3 slot and the installed modules are also 1.35 V unbuffered non-ECC; the system will run all sticks at the lowest common speed and timing.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?