BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
RIMLANCE
An 8 GB DDR3 desktop module running at 1333 MHz with 1.35 V operation and a 240-pin UDIMM form factor
This 8GB unbuffered DIMM runs at 1333MHz PC3-10600 with a CAS latency of CL9. It operates at 1.35V and uses a standard 240-pin layout for desktop systems. The module is non-ECC and built with major-brand chipsets for general desktop use.
Verify that your motherboard accepts DDR3 memory and can run modules at 1.35V. Confirm an empty 240-pin DIMM slot is available and that the board supports 1333MHz PC3-10600 speeds. The module is unbuffered and non-ECC, so it will not work in servers requiring registered or error-correcting memory.
Standard DDR3 UDIMMs run passively with no fan, so they produce no audible noise. Power draw is low at the rated 1.35V and typical desktop workloads keep temperatures within normal operating limits. Adequate case airflow is sufficient to maintain stable operation.
| Brand | RIMLANCE |
|---|---|
| Model | RUD10600LD8C8 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
The module uses the standard 240-pin DDR3 UDIMM form factor, so it fits any desktop board with a DDR3 slot that accepts unbuffered, non-ECC memory at 1.35 V.
It delivers a peak transfer rate of 10600 MB/s at CL9 latency, giving noticeable snappier multitasking and smoother application switching on compatible DDR3 systems.
Yes, provided the board has a free DDR3 slot and the installed modules are also 1.35 V unbuffered non-ECC; the system will run all sticks at the lowest common speed and timing.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?