Rosewill RSV-Z2850U 2U server chassis 4×3.5" 2×2.5" bays ATX 2×USB 3.0 2×80mm fans Silver/Black
- Rackmount
- 2U
Rosewill
A 2U rackmount server chassis with four 3.5" and two 2.5" drive bays, E-ATX motherboard support, seven expansion slots and three 80mm PWM fans
Chassis Type 2U · 6 Bays · 25.6" Depth · E-ATX
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
The Rosewill RSV-Z2900U is a new 2U rackmount server chassis built for environments that need high drive density in a compact form. It supports ATX, E-ATX, Micro-ATX and Mini-ITX motherboards up to 12 x 13 inches. Four internal 3.5-inch bays and two 2.5-inch device slots provide room for six drives total. Seven low-profile expansion slots allow additional controller or networking cards.
Three 80 mm PWM fans are pre-installed in the middle chamber to direct airflow across drives and motherboard components. The fans run under pulse-width modulation so speed adjusts to thermal load, keeping acoustic output low during typical operation. Maximum CPU cooler height is 70 mm, limiting choices to low-profile heatsinks. The PS2 power supply bay accepts units up to 220 mm deep.
Two USB 3.0 ports on the front panel give direct access for diagnostics, backup media or installation media without reaching the rear. LED indicators show power status, hard-drive activity and LAN link state at a glance. Included screws and a quick-install guide let integrators start assembly immediately. Buyers needing full-height cards, tall CPU coolers or GPU lengths beyond 150 mm should consider a taller chassis.
| Brand | Rosewill |
|---|---|
| Model | RSV-Z2900U |
| Chassis Type | Rackmount |
| Form Factor | 2U |
| Color | Silver |
| Case Material | 1.0mm SGCC |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| LED Indicators | Power status, HDD activity, LAN activity |
| Internal 3.5" Drive Bays | 4 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Max CPU Cooler Height | 70 mm |
| Max GPU Length | Low-Profile 150 mm |
| Max PSU Length | 220 mm PS2 (ATX) |
| Front Ports | 2 x USB 3.0 |
| Fan Options | Middle: 3 x 80mm fans (3 x 80mm fan included) |
| Features | Supports PS2 Power Supply form factor |
| Dimensions | 430mm x 89mm x 650mm (16.93" x 3.5" x 25.59") |
| Weight | 7.62kg (16.8lbs) |
| Package Contents | RSV-Z2900U Server Case Screws QIG |
| 配送重量 | 9.30 kg |
| 梱包サイズ | 745 × 520 × 175 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Secure the front flanges to the rack rails with four screws, then verify the rear brackets are fastened; the rear brackets are the step most often skipped.
The three pre-installed 80 mm PWM fans are the only moving cooling parts and will require replacement before the static chassis.
The maximum CPU cooler height is 70 mm, so any tower cooler taller than that will not fit.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?