SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Seagate
High-capacity 3.5" desktop drive stores 8 TB of archival data at 5900 RPM with a 128 MB cache and SATA 6.0 Gb/s interface
The Seagate Archive HDD ST8000AS0022 is an 8TB 3.5-inch internal hard drive built for bulk data storage. Its 5900 RPM spindle and 128MB cache suit write-once, read-many workloads such as media libraries, backups and long-term archiving. The SATA 6.0Gb/s interface connects to standard desktop motherboards and external enclosures. Shingled magnetic recording optimises areal density for cost-effective capacity.
Verify your system has a free 3.5-inch drive bay and a spare SATA data port on the motherboard or controller card. A SATA power connector from the power supply is required. The drive measures 146.99mm long, 101.60mm wide and 26.10mm high; confirm clearance in compact cases. Host-aware SMR operation works with modern operating systems, but older RAID controllers or BIOS implementations may not support ZAC commands.
This drive replaces smaller-capacity desktop hard drives when a single-volume archive is preferred over spanning multiple disks. The jump is worthwhile when 8TB consolidates several older drives, reducing power draw, noise and cabling. It is not suited for primary operating-system boot drives, heavy random-write databases or applications demanding sustained high IOPS. Buyers needing low-latency transactional performance should consider alternative storage technologies.
| Brand | Seagate |
|---|---|
| Series | Archive HDD |
| Model | ST8000AS0022 |
| Interface | SATA 6.0Gb/s |
| Capacity | 8TB |
| RPM | 5900 RPM |
| Cache | 128MB |
| Average Seek Time | < 12.0ms |
| Average Write Time | < 12.0ms |
| Average Latency | 5.5ms |
| Features | Host aware, optimized for SMR performance and capable of ZAC command support High instantaneous (burst) data-transfer rates (up to 600MB per second) Streaming video optimization - consistent command completion times & ERC support Idle3 power mode support TGMR recording technology provides the drives with increased areal density State-of-the-art cache and on-the-fly error-correction algorithms Native Command Queuing with command ordering to increase performance in demanding applications Full-track multiple-sector transfer capability without local processor intervention Seagate AcuTrac |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.99mm |
| 配送重量 | 0.93 kg |
| 梱包サイズ | 178 × 127 × 51 mm |
The drive is supplied as a bare 3.5-inch unit; SATA data and power cables plus mounting screws are not included and must be sourced separately.
This model provides 8TB capacity with 128MB cache, the highest capacity offered in the Archive HDD series.
The 600MB per second figure is an instantaneous burst limit; sustained transfers are governed by the 5900 RPM platters and SMR architecture, typically well below the burst peak.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?