暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with green circuit board visible on underside

Seagate

Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive

SKU CH-1CQS-3YWFZ MPN ST3400755SSProduct

A 400 GB 3.5-inch SAS internal hard drive spinning at 10075 rpm with a 16 MB buffer

  • NAND Flash Memory TypeSLC
  • 400 GB capacity stores large datasets
  • 10075 RPM spindle speed accelerates data access
  • 16 MB buffer smooths burst workloads
  • SAS 3Gb/s interface enables hot-swap flexibility
  • 50 lb 3.5" form factor fits standard bays

Enterprise Storage Drive

The Seagate Cheetah NS ST3400755SS is a 400 GB 3.5 inch internal hard drive with a SAS 3Gb/s interface. It operates at 10075 rpm and includes a 16 MB buffer for enterprise workloads. The drive is hot-swappable and weighs approximately 1.50 lb.

Suited For High-Capacity Arrays

This drive suits storage arrays needing higher capacity and lower power draw than 15K rpm models. It is not for systems requiring the lowest latency or highest random IOPS. Buyers needing faster spindle speeds or larger buffers should evaluate alternatives.

SAS 3Gb/s Interface Decides Fit

The single specification that decides compatibility is the SAS 3Gb/s interface standard. Your controller or backplane must support this exact interface for the drive to function. Verify the interface match before purchase.

特長

  • 400 GB capacity stores large datasets
  • 10075 RPM spindle speed accelerates data access
  • 16 MB buffer smooths burst workloads
  • SAS 3Gb/s interface enables hot-swap flexibility
  • 50 lb 3.5" form factor fits standard bays

仕様

BrandSeagate
NAND Flash Memory TypeSLC

この商品に関する質問

Does my system need a 3 Gb/s SAS controller for this 400 GB Cheetah NS?

Yes, the drive uses a 3Gb/s SAS interface, so the host controller or backplane must support that speed.

Will the 10075 rpm spindle speed cause vibration issues in a chassis designed for slower drives?

The 10075 rpm spindle and 1.50 lb weight are typical for enterprise 3.5" drives; most server chassis with proper mounting handle the vibration without extra measures.

How can I verify the 16 MB buffer is active after installation?

Check the drive’s reported cache size in the RAID controller BIOS or OS disk utility — it should show 16 MB.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。