Seagate ST250DM000 250GB 16MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Seagate
A 1 TB 3.5-inch desktop hard drive with SATA 6.0 Gb/s interface and 64 MB cache
The Seagate ST1000DM003 is a 3.5" internal hard drive with 1TB capacity, 64MB cache and a SATA 6.0Gb/s interface. It suits desktop PCs, all-in-one systems, home servers and entry-level direct-attached storage where large, affordable capacity matters more than peak speed.
Seagate AcuTrac servo technology helps maintain consistent tracking during long read and write sessions. The drive uses up to 1.33TB-per-disk technology and delivers an average latency rated at 6Gb/s, so extended file transfers or backup jobs run steadily without the sharp drops seen in burst-only benchmarks.
The bare drive measures 146.99mm long, 101.60mm wide and 19.99mm high, fitting any standard 3.5" bay with SATA data and power cables. Units are supplied erased to DoD 5220.22 M standard, unformatted and unpartitioned, so the OS must initialise them; up to 25 bad sectors may be present and cosmetic label variations can occur.
| Brand | Seagate |
|---|---|
| Series | Desktop HDD |
| Model | ST1000DM003 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| Cache | 64MB |
| Average Latency | 6Gb/s |
| Features | The Power of One: Seagate brings over 30 years of trusted performance and reliability to the Seagate Desktop HDDs Increase your capacity and drive down costs with up to 1.33TB-per-disk hard drive technology SATA 6Gb/s interface optimizes burst performance Seagate AcuTrac servo technology delivers dependable performance Free DiscWizard software enables high capacities on legacy PC BIOS systems Seagate Secure models provide hardware-based data security and deliver an Instant Secure Erase feature for safe, fast and easy drive retirement* Seagate Secure models meet the NIST 800-88 media |
| Form Factor | 3.5" |
| Height (maximum) | 19.99mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.99mm |
| 配送重量 | 0.54 kg |
| 梱包サイズ | 152 × 102 × 51 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The 3.5-inch Desktop HDD runs on standard SATA power; idle draw is low and typical for a 1 TB drive, so a normal desktop PSU handles it without extra cables.
You need a free 3.5-inch bay, a SATA data cable, and a SATA power connector from the power supply; the drive ships without cables or brackets.
Yes, the interface is backward compatible and will run at the slower 3Gb/s speed, so older motherboards or controllers can still use the 1 TB capacity.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?