Seagate ST250DM000 250GB 16MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Seagate
A 1 TB 3.5-inch desktop hard drive with SATA 6.0 Gb/s interface and 64 MB cache
The Seagate ST1000DM003 is a 3.5" internal hard drive with 1TB capacity, 64MB cache and a SATA 6.0Gb/s interface. It suits desktop PCs, all-in-one systems, home servers and entry-level direct-attached storage where large, affordable capacity matters more than peak speed.
Seagate AcuTrac servo technology helps maintain consistent tracking during long read and write sessions. The drive uses up to 1.33TB-per-disk technology and delivers an average latency rated at 6Gb/s, so extended file transfers or backup jobs run steadily without the sharp drops seen in burst-only benchmarks.
The bare drive measures 146.99mm long, 101.60mm wide and 19.99mm high, fitting any standard 3.5" bay with SATA data and power cables. Units are supplied erased to DoD 5220.22 M standard, unformatted and unpartitioned, so the OS must initialise them; up to 25 bad sectors may be present and cosmetic label variations can occur.
| Brand | Seagate |
|---|---|
| Series | Desktop HDD |
| Model | ST1000DM003 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| Cache | 64MB |
| Average Latency | 6Gb/s |
| Features | The Power of One: Seagate brings over 30 years of trusted performance and reliability to the Seagate Desktop HDDs Increase your capacity and drive down costs with up to 1.33TB-per-disk hard drive technology SATA 6Gb/s interface optimizes burst performance Seagate AcuTrac servo technology delivers dependable performance Free DiscWizard software enables high capacities on legacy PC BIOS systems Seagate Secure models provide hardware-based data security and deliver an Instant Secure Erase feature for safe, fast and easy drive retirement* Seagate Secure models meet the NIST 800-88 media |
| Form Factor | 3.5" |
| Height (maximum) | 19.99mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.99mm |
| 出貨重量 | 0.54 kg |
| 包裝尺寸 | 152 × 102 × 51 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The 3.5-inch Desktop HDD runs on standard SATA power; idle draw is low and typical for a 1 TB drive, so a normal desktop PSU handles it without extra cables.
You need a free 3.5-inch bay, a SATA data cable, and a SATA power connector from the power supply; the drive ships without cables or brackets.
Yes, the interface is backward compatible and will run at the slower 3Gb/s speed, so older motherboards or controllers can still use the 1 TB capacity.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?