暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch enterprise hard drive with SAS connector and printed label

Seagate

Seagate ST3000NM0023 3TB 7200 RPM SAS 6Gb/s 128MB 3.5" internal hard drive

SKU CH-Z4AK-MFKJ9 MPN ST3000NM0023

A 3.5-inch enterprise SAS drive with 3000 GB capacity, 7200 RPM speed and 128 MB cache for 24x7 bulk storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Cache128MB
  • Average Latency4.16ms

Options 3TB

  • 3TB capacity for high-volume enterprise storage
  • 7200 RPM spindle speed delivers predictable performance
  • SAS 6Gb/s interface built for 24x7 reliability
  • 128MB cache accelerates data access
  • DoD 5220.22-M compliant erase ensures data sanitisation

Enterprise bulk storage

The Seagate Constellation ES.3 ST3000NM0023 is a 3TB 3.5-inch internal hard drive built for 24x7 enterprise workloads. It spins at 7200 RPM with a 128MB cache and connects through a SAS 6Gb/s interface for predictable throughput in storage arrays.

Suited for RAID arrays and servers

This drive targets administrators who need reliable, high-capacity bulk storage in SAS environments. It is not for personal computers or workstations that lack a SAS controller, nor for builders who require SATA-only connectivity or boot drives for consumer motherboards.

Build integration notes

The bare drive measures 147.00mm long, 101.85mm wide and 26.10mm high, fitting standard 3.5-inch bays. A compatible SAS backplane or HBA is required, freeing SATA ports for other devices while delivering enterprise-grade error correction and super parity features.

特長

  • 3TB capacity for high-volume enterprise storage
  • 7200 RPM spindle speed delivers predictable performance
  • SAS 6Gb/s interface built for 24x7 reliability
  • 128MB cache accelerates data access
  • DoD 5220.22-M compliant erase ensures data sanitisation

仕様

BrandSeagate
SeriesConstellation ES.3
ModelST3000NM0023
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity3TB
RPM7200 RPM
Cache128MB
Average Latency4.16ms
FeaturesHighest-capacity large form factor enterprise drive - up to 4TB - for demanding data growth
Sixth-generation drive technology with SAS and SATA interfaces for 24x7 reliability
Enhanced error correction, super parity and end-to-end SAS-based data integrity for accurate data storage
Best-in-class rotational vibration tolerance ensures consistent performance
Improved power and cooling efficiencies with low power consumption and on-demand PowerChoice technology based on T10/T13 power management standards
Multi-drive firmware maximized for enterprise RAID system availability
Robust perfor
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
配送重量0.73 kg
梱包サイズ146 × 102 × 25 mm

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my system need a SAS 6Gb/s controller to use this ST3000NM0023 drive?

Yes, this enterprise drive requires a SAS 6Gb/s host bus adapter or RAID controller; it will not work with standard desktop SATA ports.

Can I run this 7200 RPM SAS drive alongside older SATA drives in the same server?

It can share a SAS backplane or expander with SATA drives, but each drive must connect to a SAS 6Gb/s port; direct SATA cabling is not supported.

How do I verify the ST3000NM0023 is healthy after installation?

Check SMART attributes for a health rating of at least 90%, confirm the 3TB capacity appears in the RAID utility, and listen for normal 7200 RPM operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。