暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square industrial fan with thick 38mm frame and large curved blades

Silverstone Technology

Silverstone Technology FHS80X 80mm x 38mm PWM industrial case fan

SKU CH-RZ38-2X0A2

An 80 mm industrial case fan with a 38 mm thick giant-bladed design, dual ball bearings and a 2,000–10,000 RPM PWM range for high static pressure

  • TypeATX Mid Tower
  • High air pressure from giant-bladed 38 mm thick design
  • Dual ball bearing extends service life
  • 2000 to 10000 RPM speed range via PWM control
  • 80 mm frame fits standard case mounts
  • Industrial-grade build for demanding cooling tasks

Industrial 80 mm PWM fan with 38 mm depth

The SilverStone FHS80X is an 80 mm square case fan built to a 38 mm thick frame. Its giant-bladed rotor and dual ball bearing target industrial and high-static-pressure cooling scenarios where standard 25 mm fans cannot deliver enough airflow.

PWM control limited to 2 000–10 000 RPM range

Speed is governed exclusively by the motherboard PWM signal between 2 000 and 10 000 RPM. Systems without a PWM header or software that cannot issue a duty cycle below the minimum will not be able to run the fan slower or stop it completely.

38 mm frame thickness decides fit

The 38 mm depth is the single dimension that determines whether this fan mounts in your chassis or heatsink. Measure the available clearance before ordering; any space tighter than 38 mm will make installation impossible.

特長

  • High air pressure from giant-bladed 38 mm thick design
  • Dual ball bearing extends service life
  • 2000 to 10000 RPM speed range via PWM control
  • 80 mm frame fits standard case mounts
  • Industrial-grade build for demanding cooling tasks

仕様

TypeATX Mid Tower

この商品に関する質問

What does the 38 mm thickness mean for airflow compared to a standard 25 mm fan?

The 38 mm depth allows the giant-bladed impeller to move more air at higher static pressure, making it better suited for restrictive heatsinks or dense mesh panels than a thinner 25 mm unit.

How does the 2,000–10,000 RPM range behave inside a typical case?

PWM control lets the motherboard spin the fan as low as 2,000 RPM for quiet idle and ramp up to 10,000 RPM only when component temperatures demand maximum pressure.

Does the 4-pin PWM connector work with standard motherboard headers?

Yes, the 4-pin PWM plug fits any standard 4-pin fan header and reports speed back to the board for automatic curve control.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。