暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Simmtec, Inc

Simmtec, Inc 8GB (4 x 2GB) DDR2 DIMM 240 PIN 800Mhz PC2 6400 / PC2 6300

SKU CH-3GXA-1ZWP7

Four-module DDR2 kit provides 8 GB at 800 MHz with 1.8 V operation for desktop upgrades

  • Capacity8GB (4 x 2GB)
  • 8GB total capacity from four matched 2GB modules
  • 800MHz DDR2 speed rated for PC2-6400 and PC2-6300
  • 240-pin DIMM form factor fits standard desktop slots
  • Unbuffered non-ECC design for mainstream desktop compatibility
  • Every module tested at 1.8V before shipment

8GB DDR2 DIMM kit for desktop upgrades

This kit provides eight gigabytes of DDR2 memory in four 2GB modules. It suits owners of older desktop systems that use 240-pin DIMM slots and require PC2-6300 or PC2-6400 speeds. The unbuffered, non-ECC design matches standard consumer motherboards from the DDR2 era.

Straightforward 240-pin installation

Each module keys into a standard 240-pin DDR2 slot at 1.8 volts. Problems usually arise when mixing these sticks with modules of different voltages, speeds or ranks, which can prevent the system from posting. Installing all four identical modules together avoids timing mismatches.

PC2-6300/PC2-6400 speed rating decides fit

The kit is rated for 800 MHz operation under both PC2-6300 and PC2-6400 specifications. If the motherboard only supports lower DDR2 speeds, the memory will not run at its rated frequency. Buyers needing ECC, registered or lower-voltage DDR2 should choose a different product.

特長

  • 8GB total capacity from four matched 2GB modules
  • 800MHz DDR2 speed rated for PC2-6400 and PC2-6300
  • 240-pin DIMM form factor fits standard desktop slots
  • Unbuffered non-ECC design for mainstream desktop compatibility
  • Every module tested at 1.8V before shipment

仕様

Capacity8GB (4 x 2GB)

この商品に関する質問

How can I confirm the DDR2 kit is running at 800MHz after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 800MHz with PC2-6400 or PC2-6300 timings shown.

What exactly ships in the box and is anything else required to use the 8GB DDR2 kit?

The package contains four 2GB DDR2 DIMMs; no extra cables, brackets or software are needed — just open DIMM slots on a desktop motherboard.

The listing shows PC2-6300 and PC2-6400 — which one should I pick for my system?

Both ratings refer to the same 800MHz modules; the kit will operate at whichever speed your motherboard supports, so no separate version choice is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。